UPDATE: **SOLD** Was $5000
It’s a project.
“1943 MB Willys Jeep restoration project, All parts included, but needs assembly.”
UPDATE: **SOLD** Was $5000
It’s a project.
“1943 MB Willys Jeep restoration project, All parts included, but needs assembly.”
UPDATE: **SOLD** Was $900.
Maybe some value here? Has original stenciling under the hood.
“1953 Army Jeep Willy
Needs Restoration
Have original most everything
Need to come by to appreciate this.
I bought it to restore it but just do not have the time.
4 cylinder engine
Original army stencil on inside of hood”
It’s a big project.
“Cj2a project for sale in peaces frame filled, original axles Dana 27 and Dana 44 offset, 350 chevy general 2 v8 needs rebuild hole engine cab. Missing. hood, grill windshield and frame and heavily modified tub, fenders made from 3/8 inch steel stored inside to minimize rusting all bear metal.”
This one went through a flood.
This jeep was in the August 2016 flood (it wasn’t assembled before the flood). Buyer will have to haul this away.
Please email me through CL if you have any questions.
Scammers, please don’t waste your time or mine.”
Seller inherited this project. Must sell it.
“Early 50’s willy’s is some what disassembledl, its all there – the seats. Was a project that I inherited.
I dont have the space or time, need it gone yesterday. The old building its in is about to come down 1st reasonable cash offer takes it home. Im sure I could part it out and get more out of it but I do not have the time. But please no low ballers trying to get lucky. $800 OBO”
UPDATE: **SOLD** Was $1350.
Not sure there’s much value here.
“Hi…I recently bought a CJ-6 (green sticker) Jeep that I wanted to build as a trail rig/ rock crawler but unfortunately my plans have changed…wifey says it has to go. The wheel base currently measures 105 inches which you can tell it can easily still be stretched in the front and rear. The frame has been fully boxed in and reinforced. It has 35″ tires on it…with a total of 5 rims.
These Jeeps are super hard to find and are expensive when you do find them…I’m unsure of the year but it has to be a 72-75 because of the body and wheel base…which means it can be converted back to street legal and still be smog exempt. So this was my idea but wifey isn’t cool with me having another project because of $$ so it has to go. This is a great platform because of the wheelbase and year to build a serious off road rig.”
UPDATE: **SOLD** Was $2500.
(03/19/2017) Lots of mods for this customized weed spraying jeep.
“64 mail jeep weed spray rig, right hand drive, 4 cylinder, auto trans, dual wheel rear, spray pump, spray boom, 50 gal tank, swivel reel out of top, lots of mods”
UPDATE: Still Available.. I’ve never seen a step/fender setup like this. Makes me think it is fiberglass.
“1946 Willy’s Flat fender Jeep with a small block Chevy 283 v-8, 4 speed manual transmission, Duel range Warn transfer case, telescoping tilt steering wheel, bucket seats with harness, roll bar, Dana 44 axles and large drum breaks with heavy duty drive lines. Runs great. Body is in excellent shape.”
UPDATE: Price dropped to $500.
(04/14/2017) This is an odd one.
“selling a complete rolling chassy, has some front only fenders motor runs, but smokes a lot, also have a set of diferencals from a 1943 mb , sold with bill of sale, $700 no scamer or b/s”
Unlike our sunny Friday, today was a rainy day, so any thought of blasting the frame was put on hold. But, we did get nearly all the parts removed from the frame and the engine/transmission ready to pull out. The more we removed, the more we could see that poor Rusty had come from an abusive home.
Case in point: the transmission cross member. Both sides of the frame where the transmission crossmember normally attaches have been beaten, suggesting that the jeep was often bottomed or high centered. That would also explain the need to install a custom cross member:
This net photo shows the rear passenger spring. The front portion of the bottom leaf is bent down quite a ways. This is slightly problematic in that there aren’t off the shelf springs for DJ-3A convertibles (that I know of anyway).
I don’t know which year this image was printed, but it highlights the different springs among models.
To make it more confusing, I have five leafs in the front and four in the back (on both sides). I think I should have only 3 leafs. Perhaps the previous owner broke them and installed heavier ones? Or, the number of leafs was changed after 1956? I don’t know.
If you like old jeeps, shells, and women, then this photo if for you!
“1942 Press Photo A Group of Girls Riding the Range in a Jeep Pass 16 Inch Shells.
This is an original press photo. Women who just a short while ago thought of a range as something to cook on and powder as something to pat on their faces are now doing the work of men on the firing range at the Army ordnance Department’s proving grounds at Aberdeen, MD. They don’t just fool around with the light work, either. They fill shells with powder and prime them. They run huge cranes to assemble the big guns. And they load, clean, and fire everything from Garand rifles and Tommy guns to the big railroad guns. A group of the girls riding the range in a jeep pass a huge stack of 16 inch shells. Photo measures 9 x 7.25 inches. Photo is dated 06-06-1942.
UPDATE: **SOLD** Was $4000.
Includes the Kellly Hardtop and a Capstan winch. Has plow setup, but plow not mentioned.
“Willys jeep 1946
Runs and drives
Brakes need work
New battery, 6v charges ok.
Has a capstan winch(not on in pics)
Only selling to make room and time for other projects.
I’m willing to sell without top or
Plow setup.
Come look at it. ”
Could be a good price.
“I have a 1955 jeep willys it’s a m38a1 and it runs great I just put a new carb kit in it and a set of plugs”
UPDATE: **SOLD** Was $9500.
Listed as a 1948, the body has tool indents and the rear hubs full floaters. Maybe an early ’46? Also has early grille.
“1948 Jeep Willys clean and restored”
Has some mods on the dash.
“1947 Willys Jeep CJ-2A
Mostly original
and super clean
4 cyl. flat head
runs strong, everything works
registered and ready to drive”
UPDATE: **SOLD** Was $7300.
(02/20/2017) Looks solid.
“Built for Forest Service. Rebuilt F Head 4 cyl, 3 speed, new tires and come with overdrive not installed.”
UPDATE: **SOLD** Was $3300.
It’s a left-handed DJ-5, so probably wasn’t used for mail delivery.
“Vintage 1971 Jeep DJ5. In great condition. Rebuilt transmission. Nice new paint job. Runs good. New tires. All New lights. New mirrors. New window rubber all the way around. Have clean title.”
UPDATE: **SOLD** Was $5000.
Not all original, but could be good for the price.
“This 1946 Jeep is all original / older restoration / receipts of replaced parts / clear title / needs a new head gasket / have replacement copper head gasket / roll bar / new canvas top / garage kept. It is a solid vehicle.”
UPDATE: **SOLD** Was $3500.
(04/17/2017) Runs. Has some altered steps.
“Runs good! 4cyl, 3sp!! Will trade for ??”
UPDATE: **SOLD** Was $8500
This has had lots of custom work. The grille has been pushed forward, so the fenders and hood (Bobcat fiberglass) don’t meet at the grille.
“Trail ready flatfender. 289 mustang V8 with racing goodies. Spicer 18T-case. T-18 truck trans. Power steering. Lockers, Dana 44s, warn gear drive winch, YJ springs ride real nice. Full cage. Disc brakes all around. It’s nice , but not too nice to have fun with. Low gears so no highways, I think 5:38. I want to start another project.”
UPDATE: **Status Unknown** Was $2300.
Runs and drives.
“This jeep runs terrific, has new tires and would be a great every day driver or mail delivery jeep.”
UPDATE: Still Available.
(03/25/2017) “Up for sale is a modified rock crawling Willys, cj2a.
This particular willys has been featured in 4WD magazine in the past, (when it was yellow), and has some modifications. Runs well, and has clean California title.
Chevy Vortec 4.3 V6 (210 HP)
TH350 Automatic Transmission
Dana 44 front and rear
5.5″ can (and has) handle 40″ tires.
Currently 33″ tires.
Full Roll Cage
Honda Front Seats
Detachable racing wheel”
May have a fiberglass body. No tailgate.
“1947 Willys with a rebuilt motor, new tub, tires, seats, and wiring. Also has a new soft top and doors.”
UPDATE: **SOLD** Was Never installed.
“have a best top that fits willys mb and possably cj2a. brand new ,never installed.top is in perfect new cond. windows are new and clear. been stored in factory box . bought new years ago.,complete with mounting hardware. tag says fit 41 to 45 mb. new bestop tiger tops say fit 41 to 45 mb and cj2a. not sure if this will fit 2a. can take measurements. It is black in color. 600.00 cash or will trade for cj3a parts [running l134 go devil . windshield frame. seat frames,grill. ] or intrested in buying these parts. thanks Bill”