No pics provided.
“Willys jeep metal 1/2 cab came off a 1955 willys jeep. $300.00 OBO”
No pics provided.
“Willys jeep metal 1/2 cab came off a 1955 willys jeep. $300.00 OBO”
This looks like a good price.
“Steel top and doors for a CJ3-A Willys Jeep. Some rust in top of roof. Windows roll up and down. Mirrors included. JEEP IS NOT INCLUDED $300 Jeff: (805)610-5089”
**SOLD** This was listed at $300.
Get it while it lasts.
“CAPSTAN WINCH, BUILT BY WILLYS OVERLAND MOTORS INC. MOUNTS ON FRONT FRAME RAILS BEHIND BUMPER, NEEDS PTO TO RUN, VERY RARE, IN WORKING ORDER.”
No pics and no specifics.
“I have lots of willy’s jeeps and parts for sale. Call Ed at 402-689-5105.”
UPDATE: **SOLD** Was $900.
“Metal Hard Top fits 1945-1949 Willys CJ-2A. Excellent Condition in Michigan Yellow paint. Made by Koenig Iron Works and is period correct for the CJ-2A. Great for your Jeep restoration project. JEEP IN PHOTO IS NOT FOR SALE.”
It appears everything is there.
“Plow setup from a 1948 Willys CJ-2A. 6 foot plow with a-frame, Jeep hydraulic pump, lift cylinder and more. $225. Can arrange to meet in Green Bay. Call 715-561-4998.”
UPDATE: Still Available
(02/15/2011) “P.T.O. bolts to back of transfer case on older Jeep or Willies Made by Braden Winch Co. Model CJ100 Output shaft will power front or rear of vehicle or both. This unit is in great shape, has shifter on top $300.”
UPDATE: **SOLD** Was $500.
You’ll note in the top left pic that the door looks dented. Apparently, that’s actually part of the design. You can learn more about the Civilian Arctic Top on the CJ-3B Page.
“I have a all aluminum hardtop for a willys jeep. has windshield and both doors. all glass is there except the drivers door glass is cracked. i am asking 500 or best offer or trades looking for toyota straight axle or some 35″ tires looking for willys and cj parts”
UPDATE: **Sold**
I have this chrome scattershield I doubt I’ll be using. There weren’t many made, so it is an unusual piece.
UPDATE: Was $600. **SOLD**
“Not too long ago I purchased a 1943 Ford GPW Jeep and it came with this hardtop already on it. I got it from a farm in eastern Washington near Yakima and was used as a cold weather top. Since I am in the process in restoring the Jeep, I’m not going to put the hardtop back on my Jeep, so it has to go! The top is from a late 1920’s to early 1930’s Ford, Chevy, Dodge or Buick. It has suicide doors, original rear view mirror and a windshield wiper motor (see photos). The body is sliver in color with red primer in places. It has a hole in the roof which is covered by a plywood board, which that whole area would have been cloth at one time. The windows on the doors are plexiglass and the rest of the glass windows are cracked bedsides the one on the driver’s side. Very restorable with minimal rust and no bad cancer areas.”
This appears to be a great price. No pics provided.
“Vinyl Top for 1940s vintage Willys CJ2 jeep. Fair condition (some splitting on driver window film). Comes with all hardware (aluminum frame, etc.). Cash only.”
Looks good.
“Authentic Koenig Iron Works steel hardtop for 1940s vintage CJ3 Willys Jeep. Good condition. Cash only.”
UPDATE: **SOLD** Was $200.
Looks solid.
“Half Cab Willys Jeep top with doors. Designed for a CJ3A but came off of a 1952 M38 so it will fit your military jeep. I believe it will fit a CJ2A also, but I’m not sure. If your interested in early jeeps you will know what if will fit. All glass in in-tact, no cracks and clear. Rough in certain spots some dents and cracks, nothing a welder and some elbow grease can’t remedy. $200 ”
This looks like a good price.
“Matching Front closed knuckle Dana 27 with powerloc and rear Early style rear DANA 44 with lockrite from jeep willys CJ3b with dana 18. 4.27 gears. 11″ drum brakes. Excellent swap into old cj wanting lower gearing and lockers. 150 OBO. 253-921-5809 Front Dana 27, Rear dana 44, 4.27, Lockrite”
“Spicer 18H PTO, Driveshaft & Gearbox removed from a 43 Willys $400/OBO
Email Kevin. All prices negotiable”
UPDATE: **SOLD**
There might be something useful here.
“I am parting out two CJ-2a Willys Jeeps and have parts from other restorations. T-90 transmissions parts and engine parts like blocks, heads, oil pans. Have two good frames for CJ-2a a windshield frame for 3-A PTO parts, fenders for ’50 pick-up . Can also recondition parts if needed and/or total restoration of CJ-2, CJ-3, jeepster or Pick-up. Email questions or parts needs.”
UPDATE: **SOLD**
“I have many parts from 1950-1960 Willys Trucks and Wagons. I have too many parts and not enough space. I need the room to finish my restorations. Below is just a SMALL list of the parts I am looking to sell. I don’t have any set prices here since I am not looking to get rich, just need space. Make me an offer on the part(s) you want. Im flexible and fair.
Dana 25 5.38 gears (4 cyl)
Dana 25 and Dana 44 4.88 gears (6 cyl)
Original Sears Lock out hubs for Dana 25/27
Bed
Radiators
Guages
Splash pan
T90 and D18
If you don’t see what you are looking for just drop me a line and I will see what I can do for you. I can also send pics of anything via email or phone. Thanks for stopping by!
No pics provided.
“Parts for 1946-52 Willys CJ-2A JEEP. I have a wide assortment of original parts including an engine,transmission/t-cases,axles,frames,tailgates,windshield frames,hoods,grilles,16″ wheels,tires,body tub,radiators,generators,starters,and various small parts. Call Jeff at 740-972-5055”
UPDATE: **SOLD** Was $5000.
Josh spotted these rare Trax for sale.
“SELF BUILT TRAX. FOR JEEP TJ TRAX ONLY FOR SALE. MAY FIT OTHERS THEY HAVE A 5 ON 4.5 BOLT PATTERN. WILL NOT WORK WITH MANUAL HUBS.”
The jeep will be sold, though unclear if it is for sale right now.
“NOTE: Having not been used this season, in testing unit, power angling was too slow. Thus, all three solenoids valves are being replaced as of 4 February. Plow, lifting and mounting assemblies are to be removed from Willys Jeep. (Jeep to be sold separately). Call for details
801.278.6344”
No pics provided.
“Willys jeep parts. New diamond plate corner panels( never installed) Hood, body(rough) CJ3A. MISC PARTS 2A-3A- M38. ALSO HAVE MANY DAUNTLESS 225 PARTS. INCLUDING A FOUR BARRELL HOLLY MANIFOLD. MUST MAKE ROOM, OTHER ITEMS INCL. 1500 GMC HOOD. AND 65 MUSTANG VALNCE AND TAIL LIGHTS. CALL JOHN 303-669-3417”
UPDATE: **SOLD** Was No Price.
The grille tines look straight.
“leftover parts from a willys flatfender project I abandoned. came from a 42 willys mb, but they should fit other jeeps. good hood, and grill. decent fenders, and one good seat frame.
call Alex”
Doug spotted these.
“I have two vintage Willys Jeepster or Jeep pick up truck grilles. 1940’s or early 1950’s. New old stock. Found in the attic of an old building that was a Willys dealership back in the 1950’s. Solid straight condition. Still in the red primer. Some surface rust and lots of dirt from years of storage. $285 for the pair. Call Ron 410-273-2489. Aberdeen, Maryland. Thanks!”
UPDATE: Master Cylinder, Handle, Hinges and heater are sold.
I’m cleaning up the garage and have items I’m not going to use. Perhaps someone needs them? d@willys.com …
This is a 1949 CJ-3A drain that sits under the hood and is supposed to act as a drain for water that sneaks in along the rear of the hood. It’s not in perfect shape (some dings), but I can’t remember seeing one for sale. $10 + shipping.
Brand new spring bushings (1955-1975) (6 total) free +shipping
Dana 18 parts. I can send gear numbers if necessary. Make offer.
Leftover dana 20 gears. Make offer.
No description of the condition and no pics of the actual top.
“CJ2A, CJ3B, Half cab, comes with metal doors, roll up windows, been in storage for 40 + years.”