Here’s a complete 1963 NOS Jeep-branded windshield washing kit. No description provided.
Parts Research Archives
Jeep Parts Auburn, CA
Seller has a variety of parts, including a 0-9 white-numbered speedometer.
“See pics ask for prices”
Sears? Hardtop Bradford, RI **SOLD**
UPDATE: **SOLD** Was $400.
Seller claims this is a Meyers half-top in the title of the ad. There were both Meyer and Meyers hardtops made. Meyer is the better known hardtop seller. The only documented evidence of a Meyers top is on CJ-3B Page (at bottom of this page). It looks similar, but not quite like, a Sears aluminum half top. The doors are different, as the Sears top has curves, where the Meyers has angles. The Meyers door also has a bend near the bottom that Sears does not. Based on the pics, I believe this to be a Sears hardtop rather than a Meyers (and it does not look like a Meyer, in case that’s what the seller meant).
“I have a very nice 1/2 top for an early cj5. This top has the rounded corner for that vintage look. This has a little surface rust but has no rot. This is not all banged up and would be an easy install. I have both door that have a slide up and down window. One window is plexi glass. Use it like it is for that old look or restore. This is complete with working latches. The panel that goes from the top to the floor is missing. This is a simple fabrication that I can help with.
I bought this to put on my Willys cj3b with different doors. It is too nice too cut it up to make it fit so I went a different route.
I have been working on these old jeeps since 1983 so I know what it is and how hard they are to find in this condition. I do not want to waste anyone’s time so please ask questions. I will send any more specific photos you wish. Asking $400. Save your low offers please.”
CJ-5/M-38A1 Fiberglass Hardtop Cheney, WA $750
I don’t know anything about this style of hardtop.
“Full fiberglass hard top for a 1955-1975 round top Jeep CJ5 or M38A1. Is in really good condition. Only part that isn’t good is the rear window is cracked (as pictured) but could easily be fixed with plexiglas. Great addition to any CJ or M38A1.”
Willys Parts @ Estate Sale Hood River, Or
No pics provided. But there may be some interesting parts here.
“To be held on June 17th at 5150 Lost Lake rd. Hood River, Oregon. Auction at 10:00 am. Preview at 8:00 am. Exit 64 off I-84, South on highway 35. Turn right onto Highway 282, Follow through Odell to Summit rd. Left on Summit to stop sign. Left on Dee rd. Follow to Lost lake rd. Turn right. Cross bridge, Turn left and follow to sale. Signs will be in place. Antique display cases, 2 Ford ranger pick ups, Ford ¾ ton pick up, 2 boats, Riding lawn mowers, Garden trailer, Aerator, Scrap metal, Job boxes, Outboard motors, Willy’s Jeep parts, Cutting torch, Drill press, Milk cans, Mechanic tools, Electric trolling motor, Crosscut saw, Chain saws, Garden tools, Vintage trunk, Reclining love seat, Rockers, Civil war photos, Vintage toys, Shop tools, Power tools, Washer, Refrigerator, Art work, Rembrandt print, Beds, Dresser, Camper jacks, Motorized lift for picking fruit, Exercise equipment, New shooting accessories, chain hoist, Vintage collectables, Curio cabinet. Rainbow vacuums,Filter Queen,Commercial Royal,Pressure Tank,Fishing poles,Tractor,Speedboat motor and trailer,propane camp heaters,leaf blower,Too much to list. See photos on Facebook @ Mbz Liquidations 10% buyers premium. Credit cards accepted.”
GPW/MB/2A Parts Boise, ID
Various parts.
“I have a number of jeep parts from past projects. Some F script parts.
Carter carb attached to exhaust manifold and new exhaust pipe $75.00 OBO
Two radiators one GPW other MB $125.00 each or make offer.
Alternator with voltage regulator 12V $20.00
Two starters will work for 1942-1949 CJ2 jeeps $35.00 each
MB hood rough shape $50.00 OBO
Willys windshield very rough $15.00 OBO
unknown air filter see pic $15.00 OBO”
Anyone Recognize This Windshield Frame?
Ramsey 50R winch Cleveland, OH **SOLD**
UPDATE: **SOLD** Was $250.
Could be a good deal.
“Military Jeep / Willys authentic Ramsey 50 R 5000 lb PTO winch. Selling as is, meaning I have no idea about its functioning. Pulled out of old barn.”
1961 Wagon Parts Robesonia, PA
Seller claims the prices are cheap.
“FOR SALE 1961 WILLYS WAGON PARTS. HOOD $50, DOORS $25/EA. HAVE ALL THE REAR GLASS & MOLDING. SUSPENSION PARTS, TRIM MOLDING, HEATER BOX, WIRING HARNESS, LOTS MORE SEE PICTURES, CALL WITH NEEDS. WOULD LIKE ALL OF IT TO GO.”
1946 CJ-2A Santee, CA **SOLD**
UPDATE: **SOLD** Was $1200.
“GREAT PROJECT!!!!! $1200 OR BEST OFFER
ALL IN PIECES WAITING FOR YOU TO PUT IT TOGETHER!!! Have all the paper work. Was our great dessert jeep for years. It was suppose to be rebuilt long ago but you know how that goes. We are moving and need to let it go. We have the tub, hood, fenders, seats, roll cage, front end, rear end, frame, motor , trans and transfer case all waiting to be brought back to life. Make us an offer. We would really like to see it go to a good home. Please give me a call I’m not good with texting. We will gladly take offers.
MUST PICKUP CAN’T DELIVER”
Even More Parts From Ted
UPDATE: Ted has a few more items to sell.
Ted will be attending this year’s Willys Picnic and plans to bring some parts with him. Here are just some of the parts and prices:
– NOS WW2 Winter Windshield Defroster Unit (6 volts) w/ original case and dash switch $150
– Very nice 100% complete Donaldson Oil Bath Air Cleaner Assembly ,correct for later CJ2As and all 3As excellent condition $200 OBO
– Two early CJ2A Oaks type Oil Bath Air Cleaners , one with service instructions one without $200 each OBO
– Very nice original rear Draw Bar ,no damage great condition $100
– 24Volt M38?-M38A1 Heater assembly Great condition $175 OBO ”
– Early CJ2A Corcoran Brown Bullet Parking light assemblies $150 OBO
– NOS CJ2A-3A upper seat back springs with an original slate gray cover $125 OBO
– Early CJ2A grille W/ early parking lamp assemblies and head light buckets $250 OBO
– CJ3A Grille W/ parking lamp assemblies and head light buckets $250 OBO
Warn Winch Georgetown, TX $500
Mike’s got this winch for sale. You can contact him at malexander@manitex.com or PH: (512)-942-3081.
” It is a Warn model 5687 rated at 8,000 lbs pull. I am asking $ 500.00 for it & it is in great shape.”
UPDATED: Unusual Jeep Loader Attachment
UPDATE II: To me, this looks like a Scheneker All Purpose Loader. Here is the brochure for comparison:
UPDATE: Two years ago Charles shared a photo showing an unusual loader attachment on a jeep (see the photo below the updated post). At the time, a reader named Chris commented that he had the same attachment. Over the subsequent couple of years Chris has worked to turn his attachment into a working unit. He has completed the rebuild in time to showcase it at this weekend’s Willys Picnic. Here’a s sneak peak. We are still looking for information on this loader!
(ORIGINALLY PUBLISHED DEC 19, 2014) The other day Charles shared some pics of unusual jeeps. One photo (seen below) showed a CJ-2A with a rare style of loader / bucket attachment. Chris spotted that photo and mentioned he owned one just like it, but didn’t know who made it or any history behind it. Does anyone recognize this?
Rear PTO and Shaft Reddick, FL **SOLD**
UPDATE: **SOLD** Was $250.
Could be a good price.
“Selling a rear PTO gear box and drive shaft off of a 1959 cj3b. Gear box comes with a cluster of v groove pulleys but they can be removed from the splined pto shaft. Gear box spins free but would benefit from a rebuild. I have the shifter assembly but it is frozen up. $250 or possibly trade for other Willy’s parts.”
Koenig PTO Model 41 Washougal, WA $350
UPDATE: Still Available.
https://portland.craigslist.org/clk/pts/6118377186.html
“Professionally rebuilt single lever front output Model 41 power take off for Willys Jeep wagon, panel or pickup with the Dana 18 transfer case. The original curved shift lever has been repaired and is very hard to see the repair. The chain is tight. Comes with allen bolts to mount it without disassembling the case. This may be too long for CJs as it may contact the frame. Pic 1, 2 and 3 ————————————– $350”
Porter & Reed Hardtop Hicksville, NY $50
If you can fix the damage, it’s a good price.
“This is a all aluminum hard top that doesn’t fit my car. So off it goes to you if you have a need for it. Pickup only. I will not ship this.”
PTO Rear Gear Box Swartz Creek, MI **SOLD**
UPDATE: **SOLD** Was $400.
The price is for the gear box. Seller might sell the rest for the right price.
“For sale Willys Jeep Rear PTO box .
The gear box is in good condition for its age.
I also have a PTO drive unit and shaft parts. Good ends
to build a drive shaft , I might sell all for the right price.
Thanks.”
1959 Hardtop Petoskey, MI **SOLD**
UPDATE: **SOLD** Was $500.
An unusual color, but looks in good shape. Ma
“1959 Jeep Hardtop and Doors, original
All steel is in good shape, no rust
Glass windows and gaskets are intact
Door windows roll up and down
Handles and locks work”
4 Cutlas(?) Hubcaps Ormond Beach, FL **SOLD**
Rick shared these unusual hubcaps. Given the single “J” on them, I’d guess these were produced by Cutlas Manufacturing? At the bottom is an example of “J” branded hubcaps by Cutlas.
These were for sale in Florida:
Here’s an example of the Cutlas “J” branded caps from Pascal’s website: http://jeepwillysworld.com/blog/2016/01/23/j-hubcaps/
FC-Dually Rear End Anson, ME **SOLD**
UPDATE: **SOLD** Was $800.
(05/09/2017) This looks like a deal.
“Matching set of Willys duel rear wheel axles (posi trac) off of Factory rack body Willys F.C. 170. This is probably the last set of these that you will find. I also have many other Willys parts for wagons, pickups, jeepsters, J-Series, C.J’s, Etc. Etc”
Wood Hardtop Redding, CA **SOLD**
UPDATE **SOLD** Was $125.
Bill spotted this wood hardtop. The side windows flip down. Looks well-built.
“CUSTOM MADE WOOD (W/ CANVAS) WILLY’S JEEP TOP/COVER NEEDS SOME REPAIR FOR RETROFITTING YOUR VINTAGE JEEP! ATTENTION SURFERS ! AND DEER HUNTERS !!!”
Jeep Parts Lockwood, CA $3000
Lots of stuff. Seller wants to sell as a single lot.
“MANY OLD ARMY JEEP PARTS LOCKWOOD CA EVERYTHING SOLD AS A WHOLE. PHONE CALLS ONLY MARVIN”
Free-Lock Hubs Denver, CO $100
These appear to be Dualmatic hubs with the Free-Lock private label. They certainly are rare.
“This is a very rare set of Free-Lock locking hubs. Free-Lock was made in Denver Colorado in the 50’s. Dalamatic Hub company may have bought Free-Lock. Thes sure look just like the Selectro hubs you see today. They are 10 spline, and works with all Willy’s & CJ jeeps from 1941 to 1971. Hubs are in good working order. Thanks for looking!”
Sears Hardtop Randolph, VT **SOLD**
UPDATE: **SOLD** Was $250.
Looks solid.
“An aluminum cab from a Jeep Willys CJ 2A. I’m sure it would fit other Jeeps. In good, usable condition. Rear hatch door has latches to keep it open as seen in pictures. Doors are miss matched but could be made to fit with a little work. Some plexi-glass windows need replacement. Solid cab, great for a hunting rig or a plow rig. This posting is for the cab only. Jeep not included.”
Kelly Half Cab Andover, NJ **SOLD**
UPDATE: **SOLD** Was $350.
Not many of these Kelly half cabs around.
“Kelly all steel half cab, currently on a 46 CJ2A nice shape, will include windshield, $350 or B/O,”