UPDATE: **SOLD** Was $900.
“jeep winch pto and parts”
Dual PTO w/ Koenig 100 Winch Lexington, KY **SOLD**
January 17, 2019 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
8
Parts Research Archives
Repro Body Kit Port Crane, NY **SOLD**
January 13, 2019 • CATEGORIES: Body Parts, Parts This site contains affiliate links for which I may be compensated.
UPDATE: **SOLD** Was $2200.
(11/17/2018) This painted, but never installed reproduction body has the M-38 indents with the MB/GPW dash. This should work well for someone. Interestingly, it does now have a gas inlet hole on the driver’s side.
“New steel Jeep body. This is a reproduction kit for a military M38 but could be used for any early Willys. The kit includes the new body, tailgate, hood, fenders and grill. The body has been painted but has never been mounted on a chassis. Everything is rust free so it would be a great way to restore your old Jeep without dealing with metal repair.”
GM Muncie sm465, Dana 20 adapter, and CJ-5 Headers Oswego, IL $425
January 10, 2019 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Ed (ewolsfeld@comcast.net) has got a GM Muncie sm465 with an adaptor for a dana20 and a set of Headers for a cj5. All for $425.00 obo.
CJ-5 Meyers Hardtop Baton Rouge, LA **SOLD**
UPDATE: **SOLD** Was $300.
“This hardtop comes off of my 63 Tux Park. It’s in good shape with all the glass in good shape and with all the hardware needed to mount it to a CJ5.”
MB Tub and Fenders Boise, ID $200
The tub is rough, but maybe there’s something here someone can use?
https://boise.craigslist.org/pts/d/boise-1942-jeep-willys-mb-tub-and/6787653913.html
“Selling the tub and fenders for a 1942 Jeep Willy’s MB.
They are not in the best shape, but not too bad considering they went through WWII.
They would be good for parts or candidates for a build. I was planning on using for a build, but I need the space for other projects. No title.”
Fiberglass CJ-5 Tub Lee, MA $125
If you need a cheap fiberglass tub, this might work. This needs a little work, but my tub was WAY worse than this one.
https://westernmass.craigslist.org/pts/d/lee-willys-jeep-fiberglass-tub/6782778158.html
“USED fiberglass tub AND original metal hood. The pictures show the condition of the tub, the hood is not shown in pictures it is inside and hard to photograph. Also have windshield frame.
All for one money 125.00”
CJ-2A/3A Parts Cambridge, VT **Status Unknown**
December 31, 2018 • CATEGORIES: Body Parts, CJ-2A, CJ-3A, Parts This site contains affiliate links for which I may be compensated.
UPDATE: Status Unknown. Was $2500.
Travis shared these parts for sale.
“This is a complete Jeep body with a title. The body is originally from Walck’s 4 Wheel Drive. The tailgate, windshield and hood are all stamped with “WILLYS”. Everything is in great shape.
The tub, fenders, tailgate and grill will fit a CJ-2A or CJ-3A. The windshield is for a CJ-2A only. The soft top will fit a CJ-2A or MB WWII Jeep. The roll cage will fit the CJ-2A, CJ-3A and MB and the roll cage will fit inside the soft top.
The tub has been modified. It has a Tuffy glove box. The wheel wells have been cut for larger tires (will fit up to 35″ tires) and the firewall retrofitted with a Wrangler YJ hanging pedal assembly allowing the use of a hydraulic clutch and power hydraulic brakes. The steering column is from a 1966 Chevy C10 pickup with an integral turn signal switch. The glove box, hanging pedal assembly, clutch cylinder, brake cylinder and steering column all come with the tub.
I will part it out for the prices below or sell it all together for $2500 or best offer.
Please note the soft top is draped over roll cage and not mounted to the tub. This is why it looks wrinkly.
Grill – $100
Fender, Left – $140
Fender, Right $140
Hood – $240
Windshield – $260
Tub – $780
Used Tailgate – $60
New Tailgate – $220
Fuel Tank, Plastic – $80
Soft top, Bestop Tigertop – $720
Roll Cage (fits inside soft top) – $360 “
Meyers CJ-6 Hardtop Houston, TX $450
Gayland spotted this one. It might have a dent at the top, but otherwise looks to be a good price.
https://houston.craigslist.org/pts/d/willis-hard-top-and-doors-for-jeep/6775410580.html
“CJ6 Jeep Parts – (Hard Top and Doors)
***O R I G I N A L***
– 2 doors with glass and all parts needed for installation on your own Jeep
– Hard Top has some rust, but can easily bring it back to life”
Kelly/Beck Hardtop Comfrey, MN $225
December 29, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Could be a good price.
https://mankato.craigslist.org/cto/d/comfrey-willys-jeep-topper/6747620791.html
“Willy’s Jeep topper or cab enclosure. Complete as far as I can see. Comes with doors and panels. Asking $225 obo cash.”
Various Flattie Parts Auburn, CA
December 23, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Is the red rim a Kelsey Hayes?
https://sacramento.craigslist.org/pts/d/auburn-jeep-parts-mostly-flatfender-but/6752767823.html
“1. Driver side under seat fas tank 85
2. Pass side under seat fas tank 99
-Will do 150 for both. Both come with slot for side of jeep and 1 cap.
3. Mod18 tcase. 125
4. Military flay fenders. 100 and 150 or 200 both.
5. Complete rblt f134 Fhead engine parts. Psrts only. Block cracked.
6. T84 trans shifter 50 and case 85.
7. Pressure plt and new clutch disc. Less than 100 miles. 50
8. Speedometer 40
9. Gas guage 10
10. T90 trans case and shifter needs rbld. 40 all.
11. Oil guage 10
12. Shocks off mb jeep 40 pr
13. Set of 4 steel crawler rims 8 wide by
15” off jeep 80 for all
Continue reading
Wagoneer Hubcaps Windsor, CO $200
December 21, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Maybe someone can use these?
https://fortcollins.craigslist.org/pts/d/jeep-hubcaps/6775378979.html
“I’ve got a set of OE 1977 Wagoneer hubcaps that need a good home. They are all in good shape and would look great on a driver or they’re perfect for restoration back to showroom floor spec. Hate to see them go but would like to see them get some use, $200 OBO.”
Cab Enclosure Hardtop Silverton, OR $500
UPDATE: Price dropped to $500
https://roseburg.craigslist.org/pts/d/willys-jeep-hardtop/6770342539.html
“front windshield frame doors and hardtop Fits many early model Willy’s”
Porter & Reed Hardtop Redding, CA **SOLD**
UPDATE **SOLD** Was $700.
This is one of the nicest Porter & Reed hardtops I’ve seen.
“Real nice aluminum hard top and full tool up doors. Came off a Willy’s Jeep
$700”
CJ-2A Half Top Glens Falls, NY **SOLD**
UPDATE: **SOLD** Was $150.
(11/27/2018) It’s probably later than a ’48 top, but should fit a ’48 CJ-2A.
I have the doors all the door skirt parts Windsheild Half cab hard top paint peeling missing back window half windows have cracks in glass but metal is all in good shape besides windsheild which is in fair shap”
M-38 Parts Palmyra, PA
December 14, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Engine’s been rebuilt at some point. Tranny and TC were rebuilt by Merlin.
https://harrisburg.craigslist.org/pts/d/willys-jeep-parts-m38/6766612362.html
“Have a lot of extra parts available
Transmission/transfer case. Rebuilt by Hanson mechanical and never installed.
M38 Engine – was running when pulled but had an intake leak due to a broken stud (see picture). Has RMC serial number.
M38 take off springs
M38 axles (complete but partially disassembled, 1 hub is not the right one)
If interested come see them and make a reasonable offer. The more you buy the more willing I’ll be to negotiate.”
CJ-3B Hood and Tops Cape Cod, MA $500
December 14, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Parts.
https://capecod.craigslist.org/pts/d/willys-cj3b/6771819333.html
“3 tops and one hood – Willy’s Jeep cj3b
Roll bar also available.”
1948 CJ-2A Parts Astoria, OR $400
Anyone need some parts?
https://portland.craigslist.org/nco/pts/d/1948-cj2a-parts/6769503037.html
“48 cj2a Stock Front and rear end with leafs t90 transmission and transfer case with a adapter to a 231 Buick v6 and fenderwell headers”
CJ-5 Koenig Hardtop Auburn, ME $275
Not sure how bad the run is or isn’t.
https://worcester.craigslist.org/pts/d/koenig-jeep-willys-hard-top/6767863519.html
“Koenig hardtop and doors with glass off of a 1955 Willys Jeep”
1948 CJ-2A Frame & Differentials Apex, NC **SOLD**
December 8, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
UPDATE: **SOLD** Was $650.
Frame looks ready to go.
“1948 Willy’s frame and the front and rear diffs. Frame has been sandblasted and primed. Everything has been kept inside and out of the weather.”
Meyer 6′ Snow Plow Lebanon, PA $1100
December 7, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Looks in good shape.
https://harrisburg.craigslist.org/pts/d/willys-vintage-snowplow/6734144764.html
“This 6′ Meyer plow rig is the original setup for the Cj2a Willys Jeep. It is in complete very nice condition. It should fit Jeeps from the 40’s up to the early Cj5’s from the 60’s. It will be a great accessory for your antique or you can use it to plow your driveway. Please email if you are interested and thanks for looking.”
CJ-5/CJ-6 Floor Pan Bella Vista, AR $650
December 5, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Maybe someone can use? A new one from Kaiser Willys is about $800 after the oversize shipping fee. This one does have a little notch cut out of it.
https://fayar.craigslist.org/pts/d/replacement-jeep-floor-pan/6761482410.html
“STOP acting like Fred Flinstone. Replacement front floor pan for Jeep CJ5/CJ6/M38A1. FREE DELIVERY in NWA area!! $650 or best offer, reasonable offers will be considered. This is the floor pan with the removable transmission hump so you can work on your transmission without having to pull the tub off.
Stop staring at the ground rushing under your feet on those trail rides & resting your shoes on the frame rail and transmission, put in a new floor! Save yourself some money on shipping & get started on fixing your old Jeep tub! Adventure awaits!”
Bumper Weight Tanner, AL $225
December 1, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Is this one thicker than other bumper weights I’ve seen. How many different types were there? Were their different weight amounts, too?
https://huntsville.craigslist.org/pts/d/original-jeep-farm-weight/6754949285.html
“Original front Jeep weight. Was told it is for a CJ2A, CJ3A farm jeep. Weighs app 285 lbs. Good original cond. No cracks, breaks or welds. 225.00
No TEXT or Emails.”
New Tiger Top Fairburn, SD $500
November 29, 2018 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
Sounds like a good price.
https://rapidcity.craigslist.org/cto/d/new-jeep-cj-mb-soft-top/6754443228.html
“It’s a complete, brand new, Softop-Tiger Top with all the hardware, fabric deck, one-piece full fabric doors and windows. There’s nothing else to buy to get that classic look on your older Jeep. List price $949.99.
For 1941-1949 CJ-2A & MB models.
Durable reinforced snaps designed to fit factory-original snap placements in body tub.
Really cool clear zip-up 30-mil side panel windows and rear curtain window with tie straps.
One-piece full fabric doors with clear vinyl zip-up 30-mil windows.
Iincludes new frame hardware treated for resistance to corrosion and scratches.
Selling because I want to go back to Army canvas”
Dualmatic Hubs Butte, MT $400
UPDATE: Still Available.
(11/14/2018) Kris has this set of rebuilt Dualmatic Hubs. Email him at wyantk@hotmail.com.
“These are a set of Dualmatic Lock-Out Hubs. 10 spline. They were taken off a mid-50’s Willy’s Truck. These are the “short model”. With the cap they’re about 2″ tall. This set has been fully restored. They have been thoroughly cleaned, wire wheeled, sand blasted then powder coated. Not Painted!! New Dualmatic sticker on the center of the cap. These will even come with the correct stainless steel dual-tab lock washers that have seemed to all but disappeared. The stainless steel mounting bolts are not included, however the cleaned originals will be. Continue reading
Edmund’s Dual Intake Fish Creek, WI $1850
Al’s selling this rare Edmunds 2X1 intake manifold. If interested, contact him at Lhead663@aol.com. (Was on eBay)
