- Meyers Snow Plow Reading, PA $500: https://reading.craigslist.org/tls/d/fleetwood-meyers-snow-plow-for-jeep/7246165655.html
- 7′ Snow Plow Plainfield, NJ $650: https://cnj.craigslist.org/tls/d/plainfield-snow-plow-ft-650-obo/7245703432.html
- Meyers Snow Plow Mercer Center, NJ $250: https://cnj.craigslist.org/pts/d/trenton-willys-jeep-myers-snow-plow/7247289078.html
- Meyers Snow Plow Scranton, PA $250: https://scranton.craigslist.org/pts/d/taylor-jeep-cj-meyers-plow-e46-complete/7258663464.html
- Snow Plow Wellsboro, PA $300: https://williamsport.craigslist.org/pts/d/wellsboro-plow-and-pump-off-1953-willys/7245561299.html
Parts Research Archives
Tornado 230 Engine Vancouver, WA **SOLD**
UPDATE: **SOLD** Was $500.
Marty’s got this Tornado engine and bell housing for sale.
“I have a complete tornado 230 engine for sale. Complete wirh flywheel, clutch and pressure plate, bell housing, starter, 12 volt alternator mounted on the engine, also have the original 6 volt alternator to go with, i have a factory power steering pump with mount and hoses thats not mounted too.
I was told this was a good running motor when i got it. And by the looks of it i would believe it. Shows little signs of any oil leaks, new water pump, new cap and rotor with new spark plug wires and even the detailed out valve cover. I was goimg to use it in my wagon but my build plans have changed.”
Capstan Winch Corvallis, OR **SOLD**
UPDATE: **SOLD** Was $3000.
It looks like this is the CJ-2A era Capstan with a modified mount for the crankshaft (unless I”m mistaken; I’m no expert on these).
“This is a totally restored Willys Capstan Winch, made for WWII era MB and GPW Jeeps. All the parts are here and are either restored or machined new. It bolts right to the front bumper and has a drive that bolts up to the crank, so it is a “permanent” fixture on your refurbished Jeep. Unrestored winches on eBay are priced around $3,000 so that price for this one is realistic. The winch is ready to install and go. Be the first in your club to have one and don’t go 4-wheelin’ without it.”
Year? Mode of Body? Charleston, WV $350
No pics provided.
https://charlestonwv.craigslist.org/pts/d/big-creek-40s-willy-jeep/7248580624.html
“40’s will jeep body for $350.00”
CJ-2A? L-head Colfax, WA **SOLD**
UPDATE: **SOLD** Was $150.
Maybe someone can use this.
“1946 4-cylinder Flathead Engine. Taken out of a 1947 CJ2 Willys Jeep $150”
CJ-2A Aluminum Hardtop La Valle, WI $600
This was sold as a Sears Deluxe Hardtop.
https://www.facebook.com/marketplace/item/660207391317664
“Willie’s Jeep Aluminum hard top and front grill with doors.”
Various Willys Jeep Parts Litchfield, ME **Status Unknown**
UPDATE: Status Unknown.
Seller has a variety of parts.
“AMC, Willys, Jeeps for restore or parts. Just in new OEM jeep parts, a lot of 1960 to 2000 new parts out of Jeep dealership. 1942 to 1980, Jeep CJ2a, 3 and 5, and Jeep Commando, TUB BODY 1976-1981 CJ5 nice tub $800.00, new Jeep parts, used engines, transmission, transfer cases, 3:54, 3:73, 4:27, 5:38, Dana & AMC 20, front and rear ends, body parts, frames. Call for what you are looking for. I restore and repair Jeeps, over 40 years working on them. Authorized Crown new parts dealer. Also I will buy old Jeeps, give me a call.”
Flat Fender Roll Cage Modesto, CA $300
Seems a good price.
https://modesto.craigslist.org/pts/d/modesto-willys-jeep-cj2a-rb/7253124800.html
“Cj2a Willys keep roll bar $300”
Sears-branded Selectro Hubs on Ebay
These Sears-branded Selectro hubs have the smaller ribbed style.
View all the information on eBay
“Aftermarket Sears Manual Locking Hubs Taken Off Willys MB Fits CJ2A GPW Jeep CJ. Condition is “Used”. Used take offs for rebuild or parts. D-bubba-ing my 1945 MB and finally got around to removing these off the front axles. As is condition. The Jeep has not run since I acquired it and therefor these are untested in driving conditions. Mounting bolts are not included.”
Various Parts Red Rock, NV
There’s a CJ-5 full cage, among other parts.
https://reno.craigslist.org/pts/d/reno-parts-for-jeeps/7245699411.html
“Selling jeep parts, for GPW, MB,CJ, YJ , TJ, willys pick up and wagons. Axels, transfer cases, Dana 18-20 , GM transfer cases , Dana 300 Gear Set , Frames, Engines , F Head , flat head parts, AMC engine , bell housings, fenders, Grills. Aluminum top and door for flat fender. Wheels. Call for more info, willing to deal on prices.”
CJ-2A Tub Conifer, CO **SOLD**
UPDATE: **SOLD** Was $525.
Seems in pretty good shape.
“This is a CJ2A tub in overall very decent, solid condition. The previous owner had it sandblasted and started replacing rusted panels and supports…then let it sit outside for some time. The rust you see is mainly surface rust from sitting. The tool box has already been removed (and is gone), so this would be an ideal tub to stretch for a rock crawler project. Rear floor and wheel wells are in very good condition. The dash has not been all cut-up for extra gauges, radio, speakers, etc.”
Willys & Jeep Parts Organ, NM
Lots of parts for sale. Unclear if the seller wants to sell in bulk, in lots, or individually.
https://lascruces.craigslist.org/pts/d/organ-willy-parts/7245324601.html
“Closing business lots of willy parts”
Kelly CJ-5 Hardtop Farmersville, IL $205
If this is from a 1948, it must not have fit it very well. Looks like it is possibly a Kelly Bonanza III hardtop from the late 1960s.
https://springfieldil.craigslist.org/pts/d/farmersville-willys-hard-top-doors/7237630551.html
“from a 1948
*** barn find ***
doors – window glass
hatch & corners – glass
rear sides – plexiglass”
FC-150 Bed West Point, NE $500
UPDATE: Now on Facebook.
https://www.facebook.com/marketplace/item/975280539542119/
I’m sure some FC-150 owner could use this bed.
“I bought this FC bed out in western Nebraska with the intent f using it behind a cj10 cab.
That project changed hands and directions several times, and now I have an FC bed with no home for it.
I do consider chopping it to make it a different size for some other Jeep based pickup project.
But if someone needs it for an actual FC, that would be best.
It’s not pristine, so modifying it wouldn’t be a huge sin. But it’s solid enough that a real enthusiast might want or need it. Not many folks can say they’ve ever owned any forward control Jeep parts at all, so maybe you want it for bragging rights or to build a trailer for your flatfender.
I paid 500 several years ago, so I guess we can start there. Just my luck it’ll be worth 3000 and I still let it go for 500…”
Warn Summer Hubs Hickory Corners, MI **SOLD**
UPDATE: **SOLD** Was $350.
(10/04/2020) These warn hubs are a bit warn. These dimpled versions are the second gen summer hubs; the first were the waffle style.
“WARN hub set in original metal case. Dimpled design. Converts your old Jeep into 2wd only while these are installed… thus why they have become known as “summer hubs!” Freewheeling installation to keep your front axles and differential from turning with front wheels. Should fit the CJ-2a cj3a mb gpw probably even the cj5? Don’t know for sure.”
Half Cab Hazelhurst, WI **SOLD**
UPDATE: **SOLD** Was $600.
Looks like a Koenig hardtop for a CJ-5 or M-38A1.
“The cab is solid on top and sides the rear of the cab has rust , the doors are both there as shown and are not rusted and the hinges work too glass is good in the doors and the 3 cab windows. The roof and front header are solid the 2 posts, that the doors mt to are ok, just screw or braze them onto the roof and screw them to the sides of the fender.”
CJ-2A Parts (& PTO parts) Little Canada, MN
No pics provided.
https://minneapolis.craigslist.org/ram/pts/d/saint-paul-willys-jeep-parts/7249406011.html
“Need to thin down the stash of Willys Jeep parts. These were intended for use on a CJ2A but could fit other models (CJ3A, 3B, MB, GPW):
Dually hub adapters: Believed to be Rappaport style, one hub has 2 small chips out of the flange but still usable. Includes one set of original RH thread studs and one set of new US made LH thread studs – $500
PTO Drum Pulley: Has all new bearings, seals and a fresh repaint – $600
PTO gearbox: Rear frame mount with flange. Was checked over and repainted – $400
PTO shifter: Has all new bearings, seals and a fresh repaint – $200
Voltage Regulator: 12V OEM Style by Crown new in box – $50
L-134 Head: Casting number 639660C with JEEP and no rib for late WWII MB engine, needs refurb – $150
L-134 Head: Casting number 640161, no rib for early CJ2A, needs refurb – $150
Air cleaner horn (goes on top of carburetor) – $10
Crankshaft: Fits early CJ2A chain drive engine, reground ready for use – $175
Rear seat: Original later style for CJ2A on. Has original cushions in good shape, one front foot was repaired but have used for last few years without issue – $350
I will entertain reasonable offers for all prices shown. Due to spam please text ONLY. I can send photos of all items that way too. Please include your name and what you are interested in. My number is 65One – Three2Four – Four4Seven1 and I will respond from 9 AM to 9 PM central time.
I am located a few minutes north of St. Paul. Local pick-up is preferred but can work to ship these items for the most reasonable method I can find at buyer’s cost.”
Willys Parts Hughesville, MD
Seller has a some early parts for sale:
https://smd.craigslist.org/pts/d/hughesville-willys-jeep-parts-with/7216952680.html
“Willy’s parts for sale;
Plastic gas fuel tank fits CJ2A & 3, M38, clean inside with new fuel pickup tube $60.00
“Willy’s” Hood (CJ3A ?) $80.00
Right fender. $25
M38 Grille’s $120 and up
Tail gate $50
CJ3A Windshield frame $50
Skid plate $30
M38A1 driver’s seat frame new $150
L134 Manifolds $20 each
L134 Engines $300 and up
L134 Heads $120
F134 crank $100
Water pumps $20
Fans $10
M38 Frame
Starter (6 volt) $100
Generators (6volt) $100
T-90 side shift transmission (missing top cover) with
D-18 transfer case $300
D25 front axle and D44 rear axle (drum to drum) $300 each or $500 both
M38 Frame needs work $50
M38 Leaf Springs $40 (for set of 4)
Lots more, what do you need???”
Early Hardtop Detroit, MI $350
No pics provided.
https://detroit.craigslist.org/wyn/pts/d/dearborn-heights-willys-jeep-steel-top/7235537761.html
“Original steel top & doors. MB, M38, CJ2 & 3, maybe others. From a CJ3. 350 obo.”
CJ-2A Front Clip Eustis, FL $375
Advertised as a 1946 front clip, this doesn’t have the correct parking lights.
https://orlando.craigslist.org/pts/d/eustis-willys-jeep/7242735683.html
“1946 Willy’s Jeep Flat Fenders,Hood and Grill .
Hood and Fenders has been repaired and Sandblasted , grill needs to clean.
All in good condition ready for primer .”
Koenig Crankshaft PTO Winch Bracket on eBay
I’m not sure what these sell for these days.
View all the information on eBay
“This a Koenig Crank Shaft Winch Bracket for a Willys Jeep CJ 2A, 3A, 3B. Extremely rare bracket. Condition is used. Sold as is. Ask questions first. Shipped with FEDEX.”
CJ-5 Fisher Plow Southampton, NY $400
I don’t have any brochures on the Fisher.
https://westernmass.craigslist.org/pts/d/southampton-willys-cj5-fisher-plow/7230760321.html
“Fisher plow for early CJ5 metal is in good shape as well as blade has a new rebuilt pump all hydraulic lines hood pressure”
King Seeley Governor for Industrial Engine Conway, MA **SOLD**
UPDAATE: **SOLD** Was $20.
The Seller has more than one for sale. I imagine these are pretty rare?
“Vintage King-Seeley V54S-126D governor from Willys industrial engines. New in the box. Several available at $20 each.
OESCO Inc”
Sears/Meyers Half Cab Tampa, FL $400
This Sears-branded Meyers half cab appears worth a look. No description provided.
Industrial CJ-3A? L-head Engine Pocahontas, MO **SOLD**
UPDATE: **SOLD** Was $450.
Could be worth a look. Given the oil filter bracket, this may be a CJ-3A era engine.
“Here is a Willys Jeep Industrial engine that originally powered a welder. The welder was bad and scrapped. This engine is loose and turns over but I’ve never heard it run; it was supposedly running when the welder unit failed. Should make a good engine for parts or might be restored. I understand these were used in the early Willys Jeeps including the CJ2A. Asking 450 or make an offer. It will part out for more than my asking price, so if it doesn’t sell soon I’ll just part it out. Text is best. If you are reading this ad then it’s still available; please be serious as I’ve dealt with all the deadbeats I want to.”