Features Research Archives

To Top

History of Bikini/Bimini Tops?

• CATEGORIES: Advertising & Brochures, Features • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE IV: Barney sent a photo of his rare Whitco Bikini Top attached to a 1971 CJ-5 (with his dog Manny smiling in the back). While not exactly like the bikini tops we saw in the later 1970s, it likely represents the first production example of what became the bikini top (if defined by attached to the windshield in the front and held in place by straps in the back)

bikini-top-barney

UPDATE III: It appears the definition of the Bimini top is that it is open in the front, which isn’t consistent with the tops we’re discussing below ….  I’m trying to determine when/where the top cover originated that, in the front, connects to the windshield, then goes over a mid-bar (usually a roll bar), and, in the back, is held in place by two straps from either side of the top.

Here’s a DIY Bikini top made from a 4-by-4-foot canvas tarp via Four Wheeler Mag: https://www.motortrend.com/how-to/diy-bikini-top-willys-jeep/

UPDATE II: This Whitco brochure shows that the company was advertising a “Bikini” top during the 1960s, though it isn’t the design of top (like the one below) I was hoping to document. This top is closer to a Surrey top design.

UPDATE: Vernon notes that these were also called Bimini tops, a term I think came from the boating world?

Maury asked me if I knew when bikini tops were first produced. I don’t have any information on this.  My guess is they arrived for jeeps in the mid-1970s as none of my earlier parts catalogs show the bikini top as an option. Anyone remember when they first started seeing them?

Pic for reference:

bikini-top

 
To Top

1947 CJ-2A Franklinville, NY **SOLD**

• CATEGORIES: CJ-2A, Features • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was For Trade.

Lots of custom work on this flattie.

1947-cj2a-franklinville-ny5 1947-cj2a-franklinville-ny6 1947-cj2a-franklinville-ny7 1947-cj2a-franklinville-ny8 1947-cj2a-franklinville-ny9

“Looking for trade offers only really, not even sure I want to let it go. Just bored and looking for the next thing to tinker on since I don’t have room to store them.

1947 steel tub Willys CJ2a stretched about a foot and sitting on a 1979 CJ5 chassis. YJ springs, fresh built 258 (built by Steve Damon) oil catch can, crane cam/lifters, heavy crankshaft (early model with 7 counterweights great for low rpm no-stall) Keith black pistons, head and block surfaced, T18 4 speed with 6.32:1 low gear, D20 transfer case, Ford 9″ rear end & D30 front (with lockers) 3:54 gears, 35×15 tires, custom oak dash/center console with all SpeedHut gauges (GPS speedo), hi-output single wire charging system, Kicker speaker pods, kicker amp/10” sub, integrated roll bar, Griffin radiator, MSD ign, “monstaliner” coating on body, no rust many more pics and parts but this is getting long.

I like all sorts of vehicles so shoot me a [worthy] trade offer and if I’m interested I’ll message you back to exchange more”

 
To Top

1943 War Bond Poster on eBay

• CATEGORIES: Advertising & Brochures, Features This site contains affiliate links for which I may be compensated.

Micah shared this ebay auction of a War Bond Poster. The price has already hit $183.49 as of this post with just four hours to go.

View all the information on eBay

“Great original WW2 poster sent to schools for bond or stamp drives to buy jeeps. It measures approximately 35 by 45 inches. Some condition issues, but a great vintage poster. See other auctions for more WW2 posters.”

war-bond-poster

war-bond-poster2

 
To Top

‘Jeep’ Matchbook w/ Post Hole Digger on eBay

• CATEGORIES: Advertising & Brochures, Features • TAGS: This site contains affiliate links for which I may be compensated.

Here’s a neat matchbook featuring a jeep with a post hole digger. It still has matches.

View all the information on Ebay

“Post WWII vintage matchbook for Jeep – Fort Worth Willys Overland Co., Fort Worth, Texas. Willys Overland Motors, Inc. Toledo Ohio. Great image is very similar to the 1945 press release of the CJ-2A Post-hole digger demo.”

forth-worth-matchbook-jeep-post-hole-digger4 forth-worth-matchbook-jeep-post-hole-digger5 forth-worth-matchbook-jeep-post-hole-digger6 forth-worth-matchbook-jeep-post-hole-digger7 forth-worth-matchbook-jeep-post-hole-digger8

 
To Top

Quackpot Poster on eBay

• CATEGORIES: Advertising & Brochures, Artists/Drawings, Features This site contains affiliate links for which I may be compensated.

Adam shared this ebay auction for another Quackpot poster. The image below is from a 2013 auction (it’s a better quality image than the one posted to eBay).

View all the information on ebay

1944-motor-pool-quackpot-poster1

“THIS AUCTION IS FOR ONE VINTAGE, ORIGINAL “QUACKPOT MAINTENANCE” U.S. ARMY CONSERVATION PROGRAM POSTER

DATED – 1944, 20X14 INCHES IN SIZE

VERY GOOD SHAPE OVERALL. SOME SMALL TEARS ON EDGES. THE POSTER WAS FOLDED IN THE MIDDLE SO IT HAS A CREASE.

PRINTED ON POSTER: U.S. GOVERMENT PRINTING OFFICE -1944- 0-612414
ARMY CONSERVATION PROJECT NO. 121-021

SHIPPED ROLLED
RARE,VINTAGE JEEP/WW11 POSTER”

 
To Top

2022 Holy Toledo! Calendars are Now in Stock

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

The 2022 Holy Toledo! calendar is now in stock and ready for your holiday purchase!

2022 Holy Toledo COVER

 
To Top

Finally, All Three Jeeps in the Shop!

• CATEGORIES: Biscuit, Cosmic-Crisp-Race-Jeep, Features • TAGS: This site contains affiliate links for which I may be compensated.

Yesterday, with cold weather arriving soon, I took advantage of a warm, but very windy day, to pull Biscuit off the trailer and put it on the hoist. Now, all three jeeps are in the shop.

But, before we gathered the jeeps, both Ann and her son Daniel, who has been helping us around the property, each took the race jeep for a run in the pasture.

Here I am giving Daniel a ride. Unfortunately, my long legs preclude me from shifting into second gear (that’s how tight it is). Once I fix that, I can go much faster.


Here are some still shots. First up is Ann in the cockpit:
2021-11-15-ann-race-jeep

Here’s Daniel just finished with a run around the pasture:2021-11-15-daniel-race-jeep

Ann’s stomach surgery this summer, which as helped her in numerous ways, including solving her several adverse reactions to gluten (unsure why?), has also helped her lose quite a bit of weight. This has helped reduce her over all pain and also allows her to easily fit into the race jeep. Though she didn’t drive too fast, she did have fun racing around our back pasture. Once she gets used to it, I expect she will enjoy racing at a PNW event.

Continue reading

 
To Top

David Tracy Finds a Stolen(?) FC-150

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

Jalopnik’s David Tracy recounts his adventure with a “barn-find” FC-150 that seemed too good to be true. As the story unfolds, you’ll see that you just never know about these jeeps.

https://jalopnik.com/im-not-saying-i-bought-a-stolen-car-but-im-also-not-sa-1848029778

jalopnik-fc-story

 
To Top

Race Jeep’s Spacers Removed

• CATEGORIES: Cosmic-Crisp-Race-Jeep, Features This site contains affiliate links for which I may be compensated.
2021-11-14-cosmic-crisp-spacers5

Cosmic Crisp with the spacers removed and the five lug Hurricane rims attached.

On Sunday the southern winds blew threw Prosser, pulling leaves from the poplar trees and swirling them throughout the property. The winds also brought some warm temps, which made it a perfect time to be inside the shop getting some work done. It was finally time to tackle the spacers.

If you recall, right before I went into the hospital in June, I had started to remove the rear spacers, only to find out that they weren’t all that willing to budge. In addition, several Allen bolts were already stripped. Ugh…

So, yesterday, I got out several drills with differing sizes of bits to work through them. On the driver’s rear, all six bolts had to be drilled out. Though the bolts weren’t hardened steel, it still took a while to drill each of them.

Some fo the equipment involved:

2021-11-14-cosmic-crisp-spacers1

The first drum successfully drilled:

2021-11-14-cosmic-crisp-spacers2

Once all six bolts were drilled (about 45 minutes or work), the spacers split, revealing five-lug brake drums:

2021-11-14-cosmic-crisp-spacers3

Thankfully,  on the passenger rear, only three of the six had to be drilled. Once that was removed, I turned to the front end, only to discover that different spacers were used. It turned out that disc brakes were six lug, so that spacers were thinner and the lug nuts holding the spacers were visible, so no drilling was necessary. So, now I have six lug rims on the front and five lug rims on the back. I suppose that doesn’t really matter.

Here are the spacers.

2021-11-14-cosmic-crisp-spacers4
With the spacers removed and the tires remounted, Ann and I took the “Crisper” for a spin in the pasture in the dark. It’s not much of a photo, but at least one photo sort of turned out okay.

2021-11-14-cosmic-crisp-driving

The spin through the pasture was the longest test drive I’ve had with the race jeep. I discovered that I am still too tall for the seat setup, so that still needs to be changed. I also learned that I can’t shift into second gear, as my knee is in the way. Yep, there will need to be changes to this setup. But, the engine sounds great and racing around the pasture was pretty fun (even in the dark in first gear).

 

 
To Top

FC-Wrecker Photo on Facebook

• CATEGORIES: Features, Old Images • TAGS: This site contains affiliate links for which I may be compensated.

Mike shared this photo of an FC-150 wrecker in New Jersey that was posted to Facebook. Mike actually remembers seeing this same FC in New Jersey back in 1961.

fc-wrecker-nj