emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: Don’t forget the Willys Rally this weekend!
This year’s Midwest Willys Rally is June 03-04 this year. This event takes place at Heuston Woods State Lodge in College Corner, Ohio. Learn more here: http://www.mw-willysjeep.com.
UPDATE: Don’t forget that the Great Willys Picnic is next weekend.
This year’s Great Willys Picnic occurs June 12th, 2022.
“Sunday June 12, 2022 from 9 am – 4 pm at the Wanamaker, Kempton & Southern Railroad located in Kempton, Pennsylvania.
The Willys Picnic will be in compliance with all regulations in effect on June 12th. Be prepared for possible changes from past events.”
Ann has dubbed the yellow racer “Little Miss Sunshine”, due to the yellow color. I don’t know if that’s the end-all name, but it’s a fine name for now.
Yesterday, I decided to remove the body so I could get a better look at the condition of the cage and the suspension.
Let’s take a look first at the rear suspension. The suspension in the rear consists of 2.5″ ranch springs that have been outboarded, to which a sway bar and arms have been added. In the pic below you can see the sway bar behind the axle and the arms in front, connected under the frame. The springs are outboarded six inches. For example, the spring holder in the back consists of a 2×4 rectangular tube, positioned horizontally (under which the spring holder is welded), was welded to a 2×3 tube positioned vertically, which was welded to a 1/4″ plate that was then welded to the frame.
The front of this rear setup is similar, only for additional strength, a 2.5″ tube was welded to the spring holder and frame, which is then welded to the side bar that sits outside and under the body.
Blaine forwarded photos of a Willys Wagon with the one-lever-style Dualmatic hubs that include a center bump. I don’t have docs that conclusive identify this one-lever hub as a Dualmatic, but it seems highly probable. Given the design, an attempt to secure the lever with a bump to keep it from shifting, it is likely it was an iteration of the original Dualmatic one-lever hub.
Below is what I have documented for the one-lever Dualmatics and my related guesses as to why. (For two-lever variations of the Dualmatic hubs, try this link)
As a reminder, here is the original patent by Simonsen for the Dualmatic:
Here’s what I believe that original hub looked like:
This was likely the second version, this time with two circular bumps:
One of the issues with both of the early versions was that the internal forces apparently could cause the lever to bend. Here’s an example:
To halt that from happening, as photographed by Blaine on a Willys wagon, Dualmatic may have gone with this design:
A similar design was photographed on a Dodge truck (or I was told it was a Dodge truck):
Perhaps Dualmatic concluded that the simple one lever design simply didn’t hold up, so the company shifted to a two lever design. This is the point where it would be good to compare the internals of the one-lever vs. two-lever design.
Bob shared the photo at the bottom that appeared on a Craigslist Ad for a 1977-J10. It shows what appears to be a Cutlas hub, but it’s a design I don’t have documented. Let’s review the Cutlas Selective Drive Hubs:
The first design was model 100-2 and had no slot:
Later, Cutlas came out with the slotted form of the hub. Note that the slated knob has a “506-1” part number, suggesting that this whole hub was model 500-1.
Arguably, the Bulldog was the next iteration of this general design. It too has the slotted knob, but lacks a model number:
The hub Bob spotted was on a later model jeep, so maybe Cutlas offered this version of the hub for a short time? It seems to be an further iteration of the Bulldog; unfortunately, I have no brochures that document it.
This 1960 brochure labeled Form No. DM60-09 took some patience to finally locate on eBay, though I had to purchase 10 brochures (8 of which I already had). At least the price was low.
This 1963 one-page double-sided brochure printed in Canada announces the new Wagoneer and Gladiator models. What I found interesting was on the back. The chart shows the electrical setups for all vehicles as of 1963. I was surprised to see that while the Surrey DJ-3A still had the 6 volt battery option, the standard Dispatcher DJ-3A did not. I was surprised to see the FCs also had a 6 volt option still.
It is possible this was unique to Canadian made jeeps, but I can think of no reason that would be the case.
This desk comes with drawers.
https://denver.craigslist.org/fuo/d/wheat-ridge-willys-jeep-desk/7478669675.html
“This a one-of-a-kind, Willys Jeep desk that is perfect for a Jeep enthusiast or anyone looking for a very unique piece of furniture. This originally sold for $1500.”
A set up Dualmatic-style two-lever hubs appeared for sale on Facebook the other day. What made this set unique was that the hubs were private labeled for Kelly Manufacturing. It’s the first set I’ve seen with Kelly’s information on it. I doubt there are many other hubs bearing these stickers.
This shouldn’t be too big of shock, as Kelly also private labeled Kayline tops for sale in the late 1950s. And, of course, Dualmatic was offering to private label their hubs for Sears, Allstate, and other entities.
UPDATE: **SOLD**
This rare Parmley-Bodied sold quickly on Facebook. Not many of these around and even fewer with a hardtop.
