emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $350.
Listed as a 1947, the oil filter holder is a CJ-3A or later, so this may be a later engine.
“1947 Cj2A motor, frozen from moisture getting it is, I have been soaking the cylinders in penetrating oil. Still has oil in the block. Doesn’t include the starter or generator.”
UPDATE: **SOLD** was $200.
There could be some parts value here.
“I’m selling a complete engine, transmission and transfer case from my 1957 Willys Jeep. I have no idea the condition of any of it. Trans and T-case seem to shift fine and I briefly tried to turn the engine over by the crank with no luck. Lots of good parts, oil bath air cleaner assy, distributor, valve cover, oil pan, starter, exhaust manifold, etc….
Make me an offer and come pick it up. I can help load or possibly deliver if u pay asking price. $200”
There could be some water/rust in cylinder #4.
https://www.facebook.com/marketplace/item/292863665009745/
“Willys Jeep engine and tranny sold as is $500 obo”
UPDATE: **SOLD** Was $200.
Possible rebuild core.
“Used L134 Engine from Willys Jeep
Engine has low/no oil pressure
Good Core or Rebuild
Email with questions
Make Offer
As shown (no Distributer, no Carb)”
Seller has a number of military-related engines, including M-151s, Super Hurricane, Game Goat, and M-series.
https://ogden.craigslist.org/pts/d/huntsville-military-engines-and/7122503634.html
“m151 engines, m715 engines, gama goat engines (3-53) detroit, willys super hurricane engine, 2a042 generator engines , 1a08, 2a016, standard gasoline engines, 6v53 engines, 8v53 camshafts, Dodge wc/m37 transmissions, valve grinders, tire machine, alternator testing station, band saws, bunch of other stuff as well call or text for pictures and prices or set up a appointment for checking a item out.”
UPDATE: **SOLD** Was $400.
This appears worth a look.
“Early Jeep L Head 4 cylinder motor Motor ran when taken out Went with an F Head 134 Comes with Dana 44 427 geared rear end”
UPDATE: **SOLD** Was $1000.
I wonder if this includes the manifolds and carb?
“Willys l134 go devil complete engine”
UPDATE: **SOLD** Was $150.
This came out of a 1943 MB/GPW. If you are looking for an alternative engine, this makes a good one, especially at this price.
“M38A1 Military Jeep & M-100 Military trailer. The real thing!
Rebuilt original 4 cyl engine, carburetor, & fuel pump – everything works well.
Trailer has a removeable wooden seat(s) insert and a tubular framework for a top.
Ask price is $7,500 OBO (Verbal appraisal is Approx $12M for the pair).
Cool little piece for a country house, cottage or farm.”
UPDATE: **SOLD** Was $650.
Frank’s selling this Tornado engine.
“This is a 230 taken from a 1964 Wagon to swap in a Chevy. it is clean and complete. Been stored inside since,I was told that it did smoke if let to idle for a period. (Valve seals?)
Has starter,generator and oil bath air cleaner.”
UPDATE: **SOLD** Was $100.
It’s bored .060, so not a ton of life left.
“Was running when pulled, .060 0ver needs rebuild, come get it!”
UPDATE: **SOLD** Was $500.
I’m sure someone could use this.
“Near complete f head engine. Pulled from Willys mb. Only pulled to replace with original L head engine. Been stored in garage since pulled.”
Seller has three different engines.
1. MB Engine $700: https://hudsonvalley.craigslist.org/pts/d/chappaqua-willys-jeep-engine-mb/7072639828.html
2. CJ-2A Engine $350: https://hudsonvalley.craigslist.org/pts/d/chappaqua-willys-jeep-engine-cj2a/7072647819.html
3. CJ-2A Engine $375: https://hudsonvalley.craigslist.org/pts/d/chappaqua-willys-jeep-engine-cj2a/7072645407.html
Someone might like this. This likely includes a T-86 (not a T-96 as I indicated earlier) with a BW overdrive.
https://albany.craigslist.org/atq/d/corinth-kaiser-supersonic-engine-with/7072338412.html
“Complete Kasier Supersonic Engine with Overdrive Transmission also bell housing.”
UPDATE: **SOLD**. Was $400.
Unclear what value is here.
“CJ3B – CJ5 Want to sell as a pair”
Seller has four engines in differing conditions.
https://phoenix.craigslist.org/nph/pts/d/phoenix-willys-l134-engines/7072837906.html
“I have 2 almost complete engines for willy’s jeep 4cyl flathead motors $300 each that will need complete rebuild and possibly some machine work done and no heads then I also have 2 bare blocks $100 each that will need to have machine work”
UPDATE: **SOLD** Was $500.
The looks like a good price. It has an unusual carb horn setup.
“Flat head 134 complete. Exhaust , bellhousing and clutch also included. Comes with original starter but have 12volt gear reduction for extra. $500 for engine and $100 for 12volt starter”
UPDATE: **SOLD** Was Make Offer.
Could be worth a look.
“WW2 jeep willys engine. Engine is in a water pump. Marked MB. I’m not sure of the condition, but it does turn free. What you see is what you get. I would like to sell together. Please feel free to make an offer! I will consider any offer. Thanks”
UPDATE: **SOLD** Was $500.
This is a former industrial engine. It has a later model oil bracket.
“Willy’s Jeep L-134 Engine, CJ2A, ‘Go Devil’ 4 cylinder, between 1945
and 1948…. 12 Volt coil and condenser, has good water pump, Carter YS
carburetor, Autolite distributor, good starter and flywheel.
This L-134 engine runs nice with 50 lbs oil pressure, no
smoke, drips, or noises…. solid engine.
Can run this engine on inspection, no generator.
Great for any Willy’s/Jeep application with a L-134 four cylinder.”
UPDATE: Status Unknown. Was $500.
This could work for someone.
“1953 Willy’s Jeep CJ 4 cylinder engine for sale.
Electronic ignition.
It runs and I can let you hear it run.”
UPDATE: **SOLD** Was $300/each.
Seller describes the engine as an F-head, but it’s the l-head that is pictured.
“I have 3 Willy’s 134 cu inch motors for sale.most parts are there.one was running when I pulled it . asking 300.00 each”
UPDATE: **SOLD** Was $400.
Could use some cleaning.
“willys l134 engine for sale $400 obo. turns freely, has newer rear main seal. head looks good, gasket had no blowouts. cylinder walls unscratched. bored .060 over. previous owner said it was running when the clutch went kaput. comes with flywheel and clutch housing, distributor, and manifolds.”
UPDATE: **SOLD** Was Make Offer.
Seems worth an offer.
“Nice engine with less that 500 hours on it. It cam from a WWII generator that had little use. Was running when disconnected and comes with the radiator. Make me a fair offer.”
UPDATE: **SOLD** Was $450.
There appears to be some value here.
“willys jeep engine 4 cyl vinsage model turn over $450 obo”
UPDATE: **SOLD** Was $500.
Jordan spotted this unusual combo. This package creates an early jet powered boat using a Kermath modified L-134 and a Hanley Hydrojet. I’ve included a Kermath brochure and links to the development of the Hydrojet by Keenan Hanley at the bottom of the post.
“Willys Jeep engine block casting number 804380, and Hanley Kermath HydroJet. I’ve never attempted to start. $500”
UPDATE: **SOLD** Was $400.
Might interest someone.
“Ford GPW F Script Engine Block
GPW 6015
GPW 162579
K 11311
Purchased at an estate auction. I do not see a crack below the distributor mounting.
Asking $400”
