UPDATE: **SOLD** Was $1650.

It’s a project.

“I got this Cj3b as a project, and regrettably I’m not going to be able to get to it. Stock engine, (out of vehicle) on engine stand, transmission needs a rebuild, 11″ brakes, rear axle converted to 1 piece shafts , comes with Saginaw steering box, very little rust, clear non-op title in my name, $1650 or best offer”

UPDATE: Still Available.

(04/29/2016) Parts or project.

“53 Willys jeep cj 3b frame all sandblasted and painted ,new lift kit, springs , tub has all new floors and sides , has dauntless 225 v6 be rebuilt , t90 transmission , needs to be assembled , lots of time and money already spent on this jeep hard part has been done , missing fenders grill and windshield asking 1200 obo”

http://maine.craigslist.org/cto/5610698853.html

Looks solid.

“1953 Willy’s jeep ( was Jimmy Hoffa jeep have the title )
First year overhead cam,9810 original miles , have all original parts. New distributer , elec igniton,no points, new springs, converted to 12 volt, radio/CD player And new battery”

http://greenbay.craigslist.org/cto/5609715020.html

UPDATE: Price dropped to $400. Might be an interesting rig with the extended rear.

“54 willys with high hood frame and body only . It still does front axle. I took the seats out and took back of the cab off to restore. I still have the sheet metal off the back and different seats. I got a new project. It does have a clean Mo title.”

http://stlouis.craigslist.org/cto/5608257221.html

UPDATE: **SOLD** Was $6500.

For all the work put in this, it might not be a bad price.

“Willys Jeep 1957 Turn key 355 cu. in. sbc 13.2 – 1 comp / Two wheel drive / TH400 built / B&M QuickSilver shifter / Nodular 9″ with full spool 31 spline 6.14 and 5.14 gears / Engine block 4 bolt mains / Bored and balanced rotating assembly / SRP forged 11cc dome pistons / Scat pro series rods 7/16 cap screws / Steel cast crank /AFR 195 cc heads 2.050 intake 1.600 exhaust 65 cc camber / ARP high performance head bolts / Comp cam # 12-612-5 / Harland Sharp 1.6 ratio roller rockers and heavy wall push rods / Stud girdles / Moroso deep 7qt pan with windage tray and oil scraper / High volume oil pump / Holley 750 double pumper / Weiand intake / Intake lifter valley oil baffle / MSD Off road ignition with rev limiter and dist. / B&M Hi-Tek trans cooler / 12 gal. fuel cell / Painless 6 switch box / Hooker Competition Headers / Racing Fuel Only !! / Not street legal comes with 35″ cut boggers. Motors still like new three trips to Sand Lake runs very strong approx. 500 hp and yes I’m the builder of engine all work done in Beaverton machine shop who builts race engines. Asking $8000.00 for all with extras New 5000 stall converter put together for motor and weight / Narrowed 9″ housing with all new hardware / New 35 spline spool / Super Scoopers 33x17x15″ with Weld wheels / New Auto Meter liquid filled gauges oil pressure, fuel pressure, water temp and high pressure isolator / new rebuilt dana 20 twin stick / Extra 9″ 3rd member / wrinkle wall slicks D5 compound 32x14x15″ on steel wheels real good shape / Holley 850 double pumper”

UPDATE:**SOLD** Was $5100.

(11/07/2016) Looks like a good price.

“1962 Willys CJ 3B Body good, Island Green paint ok, Full soft top in good shape, Tires like new, 4cly engine 134ci F head runs great, 3 speed t-90 transmission, 2 speed dana 18 transfer case, Warn overdrive, Front axle Dana 25, Rear axle Dana 44 with 4.88 gears, Auxiliary fuel tank, Block Heater.

New 3/15- Carburetor, fuel pressure regulator, and fuel pump.”

UPDATE: Price dropped to $2000.

(04/17/2016) Lots of work needed.

“54′ Willys project; has been in our family for 50 years. Has been in the garage for 34 years.
Has tranny, no motor, doors, seats or top. The items in plastic have been powder coated”

http://fresno.craigslist.org/cto/5597576462.html

The body is a later model 3B. The chassis is a 3A chassis or later.

“I have an extra cj3 frame and jeep body cj3/Tub for sale (pics below)
I also have the hood, windshield, fenders and 2 dash panels also (not pictured)”

http://austin.craigslist.org/cto/5585222387.html

UPDATE: **SOLD** Was $3500.

It’s a project.

“Willy’s Jeep 1954 CJ3B. (High hood) The jeep is apart, the frame has been painted all the way to the battery box. Rear end is done, brand new break lines. To many new parts to list. The metal is about the nicest I’ve seen. No cancer.”

UPDATE: Still Available.

(03/31/2015) Runs and drives.

“This 1961 Willys will never be beautiful, but it will always look cool. The basics are here.
350 Chevy engine
4 wheel drive with Low and High range
New warren locking hubs
New off road tires cost $600.00 add the cost of the new hubs and you are at $750.00 of new stuff.
8,000 pound winch
Original seats
Tail gate that will carry a boar, deer or firewood.
Registered in California, pink in hand
No lie this unit needs some work but the basics are here and it is a classic!
No smog needed, ever
$3,500.00 obo
I would consider a trade for a 28 foot gently used toy hauler with a minimum of 12 feet clear cargo space. I do not want a fixer upper. Have cash to add to the right deal.”

http://inlandempire.craigslist.org/cto/5546379476.html

Seller wants to trade.

“1954 Willys Jeep CJ3B would like to trade for a small tractor with loader. May consider selling but would rather trade.”

http://greenville.craigslist.org/cto/5577670074.html

UPDATE:**SOLD** Was $1400.

It’s a project.

“53 high hood all stock .rebuild motor needing to be Finished and you would have a nice jeep”