UPDATE: Price dropped to $11,000.
https://indianapolis.craigslist.org/cto/d/1953-willys-cj3b/6628283390.html
“53 Willys CJ3B
Hurricane 134 ci 4 cyl
3 spd trans/twin stick transfer case
Frame off restoration/original reb”
UPDATE: Price dropped to $11,000.
https://indianapolis.craigslist.org/cto/d/1953-willys-cj3b/6628283390.html
“53 Willys CJ3B
Hurricane 134 ci 4 cyl
3 spd trans/twin stick transfer case
Frame off restoration/original reb”
One family owned.
https://louisville.craigslist.org/cto/d/classic-1953-cj3b-jeep/6626378803.html
“Single family owned, garage kept working Jeep. Used on farm and around town in small community. New tires, clutch, starter button, brakes and lines, gas tank, points and plugs. Rebuilt original generator, starter motor and fuel pump. Professionally cleaned radiator. OBO”
Appears worth a look.
https://louisville.craigslist.org/cto/d/1955-willys-jeep/6624350703.html
“Has original Ford 4-cylinder motor with manual three speed transmission and factory PTO. Would be a great restoration project”
UPDATE: **SOLD** Was $2200.
Tub has some rust, but doesn’t appear too bad.
“Package deal of CJ3B body parts just brought from out west!
Minimal rust, original steel!
Tub, fenders, windshield frame, tailgate, heater, seats, new Gas tank. Everything in the pictures!
Would make a great rat rod project.
No trades. ”
Has a piece of trip around the back, maybe for a hard top?
https://www.facebook.com/marketplace/item/819178951601074
“1953 Willy’s CJ3B-runs/drives good. Owned for 20 years.”
More pics would be helpful.
https://www.facebook.com/marketplace/item/254497875117869
“Original CJ-3B that runs and drives New piston rings New wiring Solid body Comes with tons of extra parts. New starter New gasket kit New points, condenser, and coil Fresh oil change and coolant flush”
Seller has pics showing a CJ-3A and CJ-3B for sale, but only mentions one in the text.
https://www.facebook.com/marketplace/item/254615511972377
“50 willy parting out .no titles full part out”
UPDATE: **SOLD** Was $2500.
Runs and drives. Does have some floor rust.
“I am selling my 1954 Willys CJ3B. These 3Bs are getting harder to find in original untouched condition like this one. It runs, drives, and stops! Starts right up no issues. Still has original 6V system which chargers. It has the F134, T90 3 speed, and Twin stick Dana 18. Dana 25 front axle with warn hubs, Dana 44 rear axle. I have put on a new exhaust system, OEM spec front leaf springs, pivot bolts, U-bolts and shackles. New shocks all the way around. Brakes are brand new from master cylinder to wheel cylinders as well as shoes and lines.
Engine has new water pump, thermostat, radiator hoses, and fuel pump. Carb has been rebuilt too. original rims come with it. Driver side floor has been fiber glassed until I could get around to welding in new floor. I have a gas tank that will work with it until OEM one is bought. Engine smokes do to worn piston rings. can easily be fixed. I will explain on the phone about engine smoking. Jeep will come with the rest of the leaf spring shackles and pivot bolts(new), spare U bolt, 3 moog u-joints, and water bypass hose. Clean title I am the 3rd owner. I have a copy of the title before me and it was October 1970.”
No pics provided.
https://orangecounty.craigslist.org/pts/d/willys-jeep-cj3b-cj5/6625216418.html
“1965 Parts are from a jeep I got in 1975 from a local nursery that used it for moving plants etc. around on the grounds. The jeep body was in pretty bad shape but it only had 19,000 miles on it. I put most of the under carriage parts on my 53 cj3b. Put another 15,000 miles or so on it and then it sat until now. These parts are in really good condition. I can send pictures of the ring and pinion teeth, super clean.
Set of front and rear leaf springs, stock from a 1965 cj5. excellent condition. They still have 2 of the original cast type shackles and 2 newer style. Not junk, they still have plenty of arch and are stiff. $100
1965 Dana 44 with the power lock and 4:27 gear ratio. It is apart because I was going to put in a posi and ended up using a different one. The ring and pinion have very little wear. Drum to drum $300
1965 Dana 27 with 4:27 gear ratio. Front end, drum to drum. $200
1953 CJ3B Some of these parts are interchangeable.
Emergency brake assembly, Complete. $100
Hand made diamond plate tailgate with spare tire carrier. $100
Body tub, pretty rusty, it has been cut up. I still have the all the parts. Quarter panels have been cut off, the bed has been cut out. The cowl is in pretty decent
shape. The tool box lid is in good shape. It would be good for a rat rod maybe. $50
Original 3b frame, pretty straight, its got some cracks and its been stripped of all the mounts. Sandblasted, no rust thru. $50
Pair of fiberglass front fenders. Really nice shape, never painted, never hit, still white gel coat. $450
Windshield frame, very good condition. $275
Radiator , stock cj3b. good shape. $125
NEW replacment rear crossmember bumper. Fits 48-64 CJ2A, 3A, 3B. Paid $130, sell for $80
Gas tank, 5 hole sending unit. Fits 46-64 CJ2a,3A,3B. No rust thru that I can see. $20
Gas tank, 6 hole sending unit. Fits 56-64 CJ3B. No rust thru that I can see. $20
Front Bumper. Heavy C channel. $25
For anybody that has a 2.0 PINTO motor in a CJ.
Header, for a pinto 2.0 in a cj3b. Custom made, aluminum coated, 1/2” thick flange, never loosens. Comes with a removable plate
so it can be run uncorked. $300
2.0 pinto engine. 1972 motor. Pan has never been opened up. I do have the head off, I was going to rebuild the motor. Stock bore, crank has never been ground. The head has a crane cam, springs etc. big valves, the head doesn’t have more than 15,000 miles on it. It still ran good when I parked it. It was starting to smoke some and the body was rusting out. $500
Edelbrock Pony Ram intake manifold with 2 holley 185cfm carbs. $150
Stock Pinto intake manifold with the holley/weber carb. $25
Pinto aluminum valve cover. Needs to be painted or powder coated. Eliminates the oil leaks! $25″
The parking lights and headlight bezels may be salvageable … not sure about the rest.
https://providence.craigslist.org/cto/d/jeep-willys-1940s/6619223056.html
“Rusty treasure straight from the field.
1940’s Jeep Willys.
Your chance to own a piece of history.”
It’s listed asa. M-606, but I don’t see anything to indicate it is anything other than a CJ-3B. Notice that just behind the bumper it appears there are a couple of support bars that appear non stock.
https://rochester.craigslist.org/cto/d/willys-jeep-1953-navy-m606/6621778187.html
“1953 Navy Willys Jeep. Restoration 95% complete, over 20K invested. Just add Navy markings of your choice.”
Could be a good price, if it still runs.
http://www.warjeeps.com/mjs/sale18/adm247/adm247.html
“Found myself in possession of this great little jeep when my sister passed away and have kept it in a barn since then. Living in an arid climate it has held up well. Runs good but hasn’t been started in a couple of years. The old balloon tires still hold air! Selling for just $3,000.00 although since I’m not sure exactly what I have it might be worth more, Much more. Photos aren’t the best, will get more info for interested buyers.”
UPDATE: Still Available.
(06/14/2018) Has a replacement body.
https://detroit.craigslist.org/mcb/cto/d/1953-willys-jeep-cj-3b/6621657078.html
“For sale or trade. 1953 Willys CJ3B in great condition. Seats were recovered 2 summers ago, amazing shape for this year jeep. Needs a cylinder head, it leaks coolant into the exhaust and smokes. No coolant in the oil. Any other questions just ask. No other issues, drives nice down the road. No bondo anywhere on this jeep, come see for yourself. Won’t be disappointed. I hate to get rid of it but need a pick up truck for work. Looking to trade for a nice standard cab Chevy long box truck in good condition 2wd or 4wd. Asking $4,500 cash. Let me know what’s out there. More pics available if interested.”
UPDATE: **SOLD** Was $1000.
This looks to be a good price. It has a WWII engine (or at least head) and a rare JC Whitney (uncut?) 3B body.
“I have a 1946 Willys CJ2A jeep running gear with an after market fiber glass body made by JC Whitney. The serial number for this jeep is 31612 in case you want to research the model. The engine is a 4 cylinder flat head and the transmission is a manual. The engine was gone through and was honed and align bored but never started. This is a project with lots of potential. I have a good title, would like $1000 or best offer.”
UPDATE: Price dropped to $4500.
(05/15/2018) Has a bed extension.
https://sanantonio.craigslist.org/cto/d/1953-willys-jeep-cj3b-longbox/6617705883.html
“Good solid running 65 year old Jeep Classic with Antique Tags good till 2023. Restore to your liking or use it the way it is on your Ranch or hunting lease. The longbox is handy for feed or supplies. I have windshield (cracked) but frame is good along with some other items and a matching spare tire. Has 12 volt system. Also, new gas tank, water pump, and new brakes. Driver’s seat needs upholstery. Fun vehicle that should hold its value or increase with restoration. $6,200.”
UPDATE: **SOLD** Was $2500.
Maybe some value here.
“1948 CJ3B all original high hood Jeep….Two tops, new steering column, needs brakes… This vehicle will need to be towed. It does have a towbar.”
This was listed in Northern California, but it appears to be in Mexico.
https://sacramento.craigslist.org/cto/d/jeep-cj3b/6619266225.html
“Jeep 1962 classic Willy’s V6
3 speed, full syncro with Over drive
4×4
2 speed transfer case
4500 miles on complete engine rebuild
New Top and Doors never used
High Lift Jack
2 Jerry can’s/Spair tire
95% tread Goodrich M&S”
Looks good, but could use a little lift in the rear.
https://phoenix.craigslist.org/wvl/cto/d/54-willys-jeep/6607695962.html
“1954 willys jeep…fully restored..looks and runs great….all original…lots invested…..great buy…”
UPDATE: Price dropped to $3950.
(03/15/2016) It’s sat for a while.
https://atlanta.craigslist.org/eat/cto/d/jeep-willys/6610145199.html
“1956? willys cj3b goog tires will need carb cleaned and tank ha sat for six years”
UPDATE: **SOLD** Was $3500.
Passenger side and hood have some rough areas.
“I have a cj3b about 80 percent redone, runs good and is drivable, has been total stripped down to the frame, sandblasted and repainted.has a lot of new parts, the engine has been gone through. Still needs some body work and to be painted.
Asking $3500”
UPDATE: **SOLD** Was $5000.
Body has diamond plate on it.
“1953 CJ3B Willy’s Jeep for sale. This jeep is bulletproof. Body has been wrapped in steel diamond plate. It has a CJ5 1976 drive train and Steering.
Power steering, AMC 20 rear, Dana30 front both rebuilt 4:10 gears. Disc brakes front and rear. AMC 304 engine, 3 speed trans. No rust.
The original ATV!”
UPDATE: Still Available.
(05/15/2018) May have some value.
https://dallas.craigslist.org/dal/cto/d/52-53-jeep-willys-cj3b/6587372390.html
“Jeep is in pieces but all acounted for: this year model features the high hood, twon stick transfer case, hard top with sides and the hard top. Engine turns over fine by hand.”
UPDATE: Price dropped to $11,500.
(05/28/2018) The body has had some work.
https://dallas.craigslist.org/ftw/cto/d/1955-willys-cj3b/6600770421.html
“Completely rebuilt 1955 CJ3B Sandblasted. Primed, painted. New floors New hat channels, new sheet metal wherever needed. ZERO rust is left on this jeep. Transmission completely overhauled, transfer case completely overhauled, axles completely overhauled. New bearings, brakes, seals, gaskets, leaf springs, exhaust, seat pans, and covers, cables, wiring, etc.. Single stage paint. Currently 12 volt and I do have all 6 volt stuff also. I have pictures of all sandblasting, receipts for everything else. No need to sell but I may be ready for something else. No trades. Cash only.”
UPDATE: Status Unknown. Was $15,000.
(04/06/2018) Looks like it needs a few things (rear lights for example), but looks good.
“1962 Jeep CJ3B completely restored with brand new body, frame sand blasted, epoxy primed and painted. Body painted with base coat, clear coat, ( Mallard Green ). Engine bored, new pistons, new valves and crank shaft turned. All new seals and bearings installed in all components.”