It appears solid and it runs. It might be a good price.
“Call 231-744-3868 and leave a message and we will call you back.
Runs and has been kept in the garage sense 1956”
It appears solid and it runs. It might be a good price.
“Call 231-744-3868 and leave a message and we will call you back.
Runs and has been kept in the garage sense 1956”
UPDATE: **SOLD** Was No Price.
“1952 cj3a Willy Jeep 100%restored 4200.00 in new parts installed and lots of extra partsL”
UPDATE: Status unknown. Was $1200.
This has a fiberglass body.
“56 willys jeep… have title. Original 4cyl and 3 speed transmission. Runs great, 4 wheel drive works, needs brakes & electrical run. Has tow hitch & fiberglass body. Will sale for $1200. Also willing to barter, looking for atv worth $2000. Cash price lower because I know not many people have the cash right now.”
UPDATE: **SOLD** Was an auction.
I just spotted this in-process auction. It ends tomorrow (12/4). I don’t know if the jeep has been auctioned yet or not. The jeep has been changed a little. It could be a mis-titled 3A.
“1946 Willys CJ2A Jeep Utility”
UPDATE: **SOLD** Was $3500.
Looks like the drain holes have been patched, but otherwise appears solid.
“1949 Willys Jeep CJ2A with flathead cylinder. Runs good. $3,500.00”
No motor or trans. Listed as a 1942 CJ.
“I have a 1942 CJ Willys Jeep for sale. It does not have a motor or trans. $1,000 obo
email or call 360-632-6858 if you have questions or would like more info.”
UPDATE: **SOLD** Was listed at $1000.
This is listed as a ’56.
“When I baught the jeep it was running. I decided to rebuild the motor and restore it. Didnt get to far and had to quit. It has very little rust its good and solid. I think motor and drive train are original. The fenders are in the back.”
No pics provided. Other non-jeep vehicles are available as well.
“I have a 1949 willys jeep, turns over haven’t got it started, $800. will send pics through text, 573-513-6987”
No explanation about the rope around the rollbar. No description.
UPDATE: Still Available
(10/04/2013) The seller is quoting NADA, so he/she likely expects to get a lot.
“Very rare to find one with no rot and runs excellent; Motor redone and transmission is tight. Trade for? What do you have to trade? track hoe, backhoe, 4×4 tractor with extras or? N.A.D.A. value in average cond. is $10 to $11k and this is the nicest one I have seen that has not been redone.
http://www.nadaguides.com/Classic-Cars/1953/Willys-Motors-Kaiser/CJ3B/4×4-Jeep-Universal/Values”
http://valdosta.craigslist.org/cto/4164754068.html
Hard to say if there is much value here or not.
“Buy them for parts or? The 3a yard drives buy one both or will part out 207 323-one 88 seven”
Looks like some value in the parts.
“This is a mostly complete N.O.S. CJ3a, CJ3b body. It includes everything you see including, 3a hood, full front and rear quarters with inner wheel housings, new front floor, scripted tool box, and rear floor with attached cross member. This is a collection accumulated over a 35 year period. You will not buy these parts together anywhere without buying foreign imports! I am also including a 3a donor Jeep that has straight frame rails and horns. You can pick up these parts and Jeep ten miles east of Hershey, PA. Please email if interested in building a show quality jeep or just like buying American!”
UPDATE: Status Unknown. Was $4500.
“1951 CJ3A Jeep
3 speed 16″wheels needs rebuilt engine
41 Spicer rear end, 9″brakes, PTO , Tow Bar, Original Glass Some rust on body
Call Ron @ 559-977-0894”
Looks like a nice roll cage.
“This is an original 1947 Jeep Willy body (I may be wrong on the year, I do know it’s in the mid 1940’s though). It has been sitting on the property for years and will never become a project for us. It’d be great to see someone build this beauty. As you can see from the pics it has some gauges, original fold down windshield, among other things. I didn’t bother cleaning it up to show because if you’re looking for a project like this that wouldn’t make any difference anyway. Also have the frame for it too. It was attached, but to move it down here from WA it had to be separated. The frame isn’t included in this add because we may try to sell it seperately unless someone makes a reasonable offer for both. Asking $750 for the body/obo. If you are interested or would like to see it you can text or call me anytime at 623-565-1892, my name is Don (text works best for me).”
UPDATE: **SOLD** Was $2250.
If it includes the winch, this looks like a good price.
“HAS A 4 CYLINDER FLATHEAD MOTOR THAT RUNS GREAT.
NEEDS NEW BREAK LINES
****READY TO GO IN MUD NOW****”
UPDATE: **SOLD** Were $7200
Looks like a flat fender body (mb? or vec CJ-2a?) has been dropped onto a 1979 CJ-5 chassis.
“Titled as a 79 cj5 but hav a 48 willys title that came with the tub. Has a 302 v8, t18, dana 44 front, custom 35 spline 9 inch rear, 4:56 gears and Detroit lockers f/r, wheelbase stretched almost 10″, all new wiring, gauges, custom seats, full cage, tilt steering, wildwood brakes and clutch. Motor has new water pump, oil pump, gaskets and seals, alum rad, optima red top, spring under, waggy spring up front, 4″ BDS springs rear, 35/12.5/15 BFG MTs about 80% and one for a spare. Body isn’t great. Only needs a little bit to be perfect. I drive this everywhere. Hate to get rid of it.
$7200 with hardtop $6200 without or may take a partial trade on good gas mileage car or truck. Got a soft top but it’s rough.”
UPDATE: **SOLD** Was $7500.
“Original flathead 4 cyl motor, runs great, previously restored and makes heads turn. Have clear Florida title.”
UPDATE: **SOLD** Was $2200.
Not perfect, but looks like a great price assuming it runs.
“1949 Willys CJ3A. New 4 cyl motor 6 years ago. Also has an 8,000 lb wench. $2,200 OBO”
UPDATE: **SOLD** Was $650.
It looks like there’s value here. This was listed a few days ago, but I didn’t see it.
“For sale (2) 1960ish Willy’s Jeeps for parts, no titles, as seen in photo, will not separate or part, go to crusher on 11/22/2013”
UPDATE: **SOLD** Was $7500.
This appears to have early CJ-2A tags on the dash. So, there might be some 2A on the jeep as well. The front bumper has been shortened.
“1950 Jeep Willys 4×4. Always garaged. Lots of extra parts; transmission, rear end, gas tank and more.”
UPDATE: **SOLD** Was $4000
This might make a good parade jeep. I’m not sure why the gas inlet has been altered.
“I have a 1951 cj3a for sale or trade for a 18ft pontoon. lots of new parts.”
UPDATE: Was No Price. **SOLD**
This is listed as a 57 jeep, but looks like a CJ-3A to me.
“1957 willys jeep 4×4. Awesome piece of history. These things were built well. Made to military standards. Motor has been rebuilt and runs great. Trans shifts good. 4×4 hi and low works well. This would be a cool jeep for a swap or restore project or drive it as is.
Interested in 4×4 rigs. 4×4 four wheelers or anything of real value that interests me. Just ask.”
UPDATE: Still Available
(11/07/2013) This is a project that has a F-Head installed.
“1949 willys cj3a
Almost all new
New tires
New suspension
Rebuilt engine
Rust free body
Just needs a new carburetor
I just don’t have time to finish it
I will move on the price ready to sell
Dana 44 axles
T90 transmission
4 cylinder
4×4”
UPDATE: **SOLD** Was No Price.
The body and cage look in good shape.
“I have a willies jeep body that was used on a rock crawler its just the body has a roll cage gauges head lights tail light and the body wire harness”
Unclear if it runs.
“1950 Jeep has canvas doors, one that needs repair or replacing. Fiberglass top. Two seats, original interior. Has plow attachment and sturdy frame. Excellent Tires. Needs repainting and possibly starter. Has extra transmission, etc. Have registration. Cash only. Serious inquiries only.
Great for restoration. $1,500.”