UPDATE: **SOLD** Was $5000.
Looks solid.
“The Universal Jeep, CJ3A-1951
Engine – Flathead 4
Running Condition
No soft or hard top.
$5000 or best offer.
Must be paid for and picked up in person. ”
UPDATE: **SOLD** Was $5000.
Looks solid.
“The Universal Jeep, CJ3A-1951
Engine – Flathead 4
Running Condition
No soft or hard top.
$5000 or best offer.
Must be paid for and picked up in person. ”
No pics provided.
“Testing the waters, would like to trade for another 4WD, send pictures of what you have
1951 CJ3a, chevy 327ci, 3 speed manual, twin stick dana 18. two fuel tanks, power steering, front disc breaks 8K winch, rear rack with two 5 gal cans. small lift with 33/12.50/15 mudders
538 gears locked front and rear. stock front end, dana 44 full float rear with locking hubs for towing
comes with tow bar. new 12 point wiring harness.
licensed and tagged for the road, but not a commuter by any means. it is rough and needs some work but it is a beast. will post pictures later”
UPDATE: Status Unknown. Was $150.
There’s value here.
“I have cut up my parts Jeep–1953 M-38 , I kept the motor and trans, body was shot. If it’s not sold I will scrap it. It has clear title. The two rear tires & wheels don’t go with it. Come take front end or steering[any parts off] and I’ll scrap the rest. $150 obo”
UPDATE: **SOLD** Was $5000
(10/06/2014) Seller won this on eBay, but wants to sell.
“Won on eBay to restore for WW2 reenacting Jeep. No rust through, runs, great project for restorer. Not looking for a profit, just to break even or at least come close. Make an offer and we’ll see how it goes. This car is garaged.”
Comes with matching gas cans.
“49 willys jeep!! Sweet hunting rig!! Or fun and play! ”
Here’s an interesting project.
“Custom aluminum jeep cnc waterjet cut 1/8″ thick and welded by areo space welder. It is modeled after the mb military jeep. It sits on a very strong custom cnc cut box frame with 4″ lift suspension. This jeep is the ultimate build platform for offroad or onroad . polish the aluminum and one of a kind. If you don’t want the swampers I will take $5200.00 firm. No motor trans. transfer but I have some options.”
UPDATE: **SOLD** Was $2000.
It’s a project.
“1950 Willy’s CJ-3A Project Jeep – All Original parts
2 Owners, we have had this jeep since 1954
Powder coated body, fenders, hood, etc.
Custom aluminum top”
UPDATE: Was $9500. **SOLD**
(07/22/2013) This looks good.
“Totally restored 1950 Jeep CJ-2 I need room in my garage so I want to sell it. Asking $9,500 I have $12,000 into it. but i have had my fun with it so time to move on.
1,500 mile since the complete restoration.”
UPDATE: **SOLD** Was $2600.
(09/13/2014) Runs, but is a project.
“1950 Willys CJ3A in overall good shape – needs some work/restoration but a great start. The engine is complete and does start/run.
Needs brakes gone through, also needs new fuel lines. Tub has had some fiberglass repairs done over the years. I put a new carb and fuel pump in it, battery is relatively new (less than a year), new cap/rotor, wires, plugs, oil and filter.
It’s a bit of a project but a great start for someone. Call or email if interested.”
UPDATE: **SOLD** Was $3000. Might have a CJ-2A VEC body.
“1951 Willy’s CJ3A Jeep. V-6 231 4 barrel 4 speed with headers. Also have another V-6 231 motor that goes with it. Asking $3000.”
UPDATE: **SOLD** Was $750.
No title. Hasn’t run in a while.
“Vintage CJ3A Willys Jeep. THERE IS NO TITLE. Serial number 452 GB1 15021. Has original flathead four cylinder engine, 3 speed transmission, and is 4 wheel drive. The engine ran when parked (6 years ago), and is not stuck. The tires hold air. The running gear is in ok shape. The body is in rough condition. 16″ OEM wheels. The tires hold air. This Jeep has been modified and was used as a hunting truck. Has built in tow bar (uses a 1 7/8″ ball). What you see in the pictures is what you get. THERE IS NO TITLE.”
UPDATE: Still Available
(04/20/2014) Given the winch, the rims and other parts, there’s some value here.
“This is a good Jeep worth fixing. It ran and drove but has been sitting a while. The body is rough but fixable, the frame is good, and the 4×4 works. Engine should start with a battery and gas but no promises. It leaked coolant at the thermostat last time it ran. It will need carb work to idle properly. No brakes. They used to work but pedal now goes to the floor. Has a newer radiator in it.
231ci Buick v6 swapped in from a ’81 Regal. Original trans and transfer case. 2″ lift leaf springs. 15×10″ wheels with old 35″ tires. Good winch, good clutch, good top, good windshield, decent roll bar.”
UPDATE: **SOLD** Was on eBay.
This has an unusual top. It has the suicide door style.
” Picked this up off a ranch in Montana. hadnt run in years, replaced the gas tank, fuel line,changed the oil, rebuilt the generator,and carb, bled the brakes It started {smokes a little} runs, drives, and stops. 4 wheel drive works, all gear oils were up but could be changed. The cloth covered wiring isnt so good any more but things like lights and gauges seem to work.but it should be rewired.
There is some rust in the body support brackets and cabin floor but its not extensive. The tub is in good shape over all, the drivers seat is not original. It has the 16 inch tires.
It came with the Aluminum “Arctic” brand top you see on it. The doors all open, and the top itself is pretty solid if you wanted to keep it.”
UPDATE: **Status Unknown** Was $4500.
May be a good price.
“1952 willys cj3a.
rebuilt flat four with new carter carb.
runs and shifts 100%
new wiring and battery.
frame is 100% rust free.
converted to 12v
needs minor things call for more information.
pa antique title in hand.
I’m searching for a nice 4×4 suv or truck for a daily driver. must be fuel injected and in good to great condition.”
UPDATE: **SOLD** Was $3000
MIght be a good price. Includes an overdrive.
“1951 Jeep Willy’s with winch, and tow bar 3A, 4×4, needs some minor work (like carb redone, soft top, fuel pump, tires re-beaded otherwise great tread ) We have parts, (used fuel pump with glass bulb intact, carb kit, plugs, sparks, cap and rotor), 3speed with over drive, ran when we pulled into garage….. Clean Title. very very little rust – been in garage Asking $2995. ”
Looks solid.
“New Tires, rebuilt motor, good condition. Please email with ?’s. Sad to let go but don’t have room and need to sell ASAP. Serious inquiries only please, no scams”
Might be worth a look.
“Fits a CJ-3A windshield frame. Fair condition, very restorable. (No rust, of course) Has doors.”
UPDATE: **SOLD** Was $2500.
It needs a little work.
“Up for sale is my 1953 Willys CJ3A…. Its taking up too much space in my shop and I need to down size on toys. Currently has no title, and it will need a clutch which I can show you why”
UPDATE: **SOLD** Was $4000
Has updated motor.
“CJ-3 1950 classic Willys Jeep. This Jeep has the F-head engine, 4 wheel drive, 3 speed transmission, Hi/low transfer case, and runs great! No leaks. Has title. Well cared for. Great for country roads and off-roading. Call and make an offer.”
Listed as a ’46, it looks like a 3A.
“Titled as a 1946 but has a later Fhead engine, later windshield frame so who knows. Was bought as part of a package deal in order to get a CJ3B. The engine sounds pretty good, the gas is really old so smokes a little, newer exhaust, new plugs, wires, filters, oil change etc. Has no rust, has good brakes, has a Saginaw steering box, runs and drives well but needs some “tinkering” Would be a good hunting Jeep. restore or leave as is… cash is king…;”
Has some mods.
“This is (as registered) a 1951 Jeep Willys CJ-2a 4×4. It has a buick V6, 3spd tran, dana 25 and dana 27 running gear. I put a new wiring harness, gauges, LED brake and turn lights, new seat coverings and a por-15 paint job. Included is the tire carrier, spare tire, two gas cans, all spare parts and paint and the rifle rack in the middle. This jeep was used for hunting and is extremely reliable but it also looks good to drive into town. It is currently registered (Nov 2015). You can either drive it home (45-50 mph and a 5 gallon gas tank) or tow it home behind your tow vehicle.
I have seen the other Willys for sale on Craigslist and know that the $3600 for a fully running, registered and reliable Willys is priced to sell. Cash only, no shipping, no trades.”
UPDATE: **SOLD** Was $5000
This project is listed as a 1942, but any parts aren’t military.
“selling my 42 gpw.still has many script f parts.i bought this 10 years ago with plans of making it run one day, made some progress but needs an owner with more time to give than i have. has a .030 over 350 engine thats never been fired. a t150 from a 79 cj5, spicer 18 transfer case(big hole) not sure what year, original dana 27 front axle, a 1949 dana 44 with track lock, 4.88 gears. the title says its 1945 and a goofy aluminum tag is attached to the fire wall that matches title. however the real vin # gpw——- stamped on the frame tells me it was born in 1942. i have no record where it served during the war. call or text for more info.”
UPDATE: **SOLD** Was $7000
(12/20/2013) “1952 Willys Jeep CJ2A, Great Condition, Runs Great Current Tags, New Tires and Rims, Buick V6, 456 Gears, 11″ Break, Warn Hubs, Custom Roll Cage, Tow Bar, Chevy Tilt Steering, Water Proof Canvas Seats, New Seat Belts. Great running little jeep.”
UPDATE: **SOLD** Was $1200
Engine spins.
“I bought this jeep thinking I could handle the resto but its just too much for me. It has all of the original parts on it. Engine cranks over, just needs a new starter and alternator and battery and should fire right up. If you want more pictures just text me and I can get them to you”