It’s unclear from the pics how much VEC is left. The serial number is #15527.
https://phoenix.craigslist.org/evl/for/d/mesa-cj2a/7279053173.html
“Non running. Have title.”
It’s unclear from the pics how much VEC is left. The serial number is #15527.
https://phoenix.craigslist.org/evl/for/d/mesa-cj2a/7279053173.html
“Non running. Have title.”
The body is civilian. The grille is slat. The rest seems to be a variety of parts.
https://phoenix.craigslist.org/evl/cto/d/gilbert-1941-willys-jeepextremely-rare/7282924522.html
“Extreme rare and you may be one of the last to own this amazing critical part of America history
.. not to many left in this good of shape trust free and running..
Make me good ..
All decent offer will be looked at..”
Listed as a 1947, this parts jeep has a 1948 Lefty body.
https://collegestation.craigslist.org/pts/d/kurten-1947-willys-cj2a-body-and-parts/7287976301.html
“1947 CJ2A frame and body parts and 6 tires plus frame, body parts from an unknown year Willy’s. ’47’s engine, starter and generator professionally rebuild and ready to install. Clean Colorado title for the ’47. Everything inherited from a family member who passed away. No delivery and no parting – buyer takes all. Tractor available to load frames and bodies onto a flatbed trailer or truck.”
There could be some value here. No pics provided. The “59 Willys CJ2” could very well be a DJ-3A.
https://losangeles.craigslist.org/sfv/pts/d/agoura-hills-46-willys-cj2-59-cj2/7288207869.html
“i have a 46 willys cj2 with a small block chevy and 59 willys cj2 with the original flathead both need restoration $2000 for both.”
This has an M-38 body on it and also has a variety of modifications.
https://skagit.craigslist.org/cto/d/marblemount-willys-cj2a-jeep-m38-body/7286951571.html
“- 231 V6 engine Edelbrock intake, Stan’s headers, duel exhaust
– manual Muncie M21 4 speed transmission.
– Tom Woods CV drive shafts.
– 1969 CJ5 Dana 44 and 30 427 axles with floating rear shafts.
– ATV Manufacturing modern steering conversion.
– Ramsey 6000 remote winch.
– Cobra CB radio.
– Full Bestop and bikini top.
– Stainless grill and fenders.
– Manual windshield whippers.
– Working heater, blinkers, horn, two locking glove boxes.
– Tow bar, 4 wheel hubs and tail lights wired to be towed easily.
This vehicle is mechanically sound and reliable however there is a lot of dents, rust, and Bondo.”
UPDATE: **SOLD** Was $16,000.
Lots of mods.
“1948 Willy’s crawler with forty inches of flex. Four link rear leaf in front. Dana 60 4.11 Eaton E-locker front axle with a 14 bolt Detroit locker rear. 350 sb TPI with turbo 350 trans with manual valve body reverse lockout 203-205 doubler transfer case. 42” Iroc’s on beadlocks. $16,000 obo. No tire kickers please. Text only please. If I feel that you’re serious I’ll call you back.”
This jeep has a fiberglass body. The bumpers might be from Runck (Runck made products out of North Bend, Ohio .. Rick Riley has more examples on Runck products from this 2018 visit).
https://boston.craigslist.org/nos/cto/d/gloucester-1946-willyz/7286386991.html
UPDATE: **SOLD**
(01/08/2021) Not sure how much value is here.
“Willys Jeep and other Jeep transmissions for sale in an estate sale.”
UPDATE: **SOLD** $3900.
(01/12/2021) This may have a 3A body and be built from various parts.
“**LOCATED IN GRAHAM, Tx Must pick up there**
Willys Jeep. The body has been bondoed and painted. It has an inline strait four-cylinder and a new carburetor. The tires are in good condition. Plexy glass window comes with it. We are not able to get it to run.”
There’s no price on this and the pics aren’t very helpful, but the rear hubs suggest this could well be a 1945 CJ-2A. Also, the serial number appears to start with a “1”.
May have been a VEC.
https://www.facebook.com/marketplace/item/422794672156406
“1946 CJ2A with a even fire Buick v6. Roll bar, removable steering wheel, full soft top, aluminum fuel cell. Needs the power steering gear rebuilt. I have a new steering gear on it but it doesn’t fit well. I have the old one in parts in a box. Clean title”
This looks to have a replacement body.
https://www.facebook.com/marketplace/item/267686478053020
“1947 CJ 2A. FRAME OFF RESTORATION”
UPDATE: Still Available.
(12/02/2020) Sounds like it runs and drives.
https://www.facebook.com/marketplace/item/1193853607683568
“Garage kept since 1993, good condition. Three speed floor shift transmission”
UPDATE: Still Available.
(02/11/2021) I”m surprised the seller hasn’t switched the title if he’s owned it a few years. Needs work of some kind, but runs.
https://www.facebook.com/marketplace/item/617006088968312/
“1947 Willy’s Jeep shipped from Oregon a few years ago and has been in storage every winter since. Frame is in great shape for its age and bed was sprayed with black truck bed spray long time ago. Good tread on tires. Has tow bar up front to take it on trips or to the trails. Original Willy’s go-devil engine. It runs good. Needs some work, but mechanic buddies say it wouldn’t take much. Not desperate to get rid of “Gretchen”, but could use the space and thought if someone wants it bad enough and throws me the right offer or trade, I would be willing to pass it on to the next guy. A total blast to drive and there’s nothing like an all American Willy’s. So throw me an offer for cash or trade – or a combination – and we’ll see if it makes sense. When it comes to $, would accept the best offer. When it comes to trade, I would be most interested in bare land, camp, possibly the right vehicle (good truck, off road vehicle, motorcycle, etc) musical equipment, farm/homestead equipment, etc….things of fair trade obv. Open to other ideas as well.”
UPDATE: **SOLD** Auctioned through sealed bids.
Jerry Huber confirmed that this is a 1945 VEC CJ-2A, serial number #11822. Jerry added, “That would place the body at the end of the 1945 production run. The Fire Dept. documents that they got it in the spring or summer of 1946, which is still possible with the time for the Darley Fire Conversion. There is also a story that the vehicle had a frame failure shortly after they got it from Darley and it was returned to the Willys Plant in Toledo where the frame was replaced with a heavier duty and reinforced unit. I have heard that story before but can’t verify although some one with more history on the unit may be able to confirm.”
==================
Originally posted Mar 2, 2021: Listed as a 1947, this is likely a 1945 VEC CJ-2A. It’s got rear hubs, indents, early windshield, a column shift and (I think) the earliest “WILLYS” data plate. Bidding is allowed from March 1, 2021, though April 02, 2021.
“Public Notice – Richfield Township is placing the 1947 Willy’s Jeep Fire Apparatus for sale via SEALED BID. Richfield Township is accepting SEALED BIDS for purchase of the 1947 Willy’s Jeep Fire Apparatus from Monday 3/1/2021 through Friday 4/2/2021 at 4:00 PM. The vehicle is sold as is with no warranties or guarantees made of any kind. This vehicle has been garage stored and maintained throughout its lifetime with Berkey / Richfield Township Fire Department as the original and only owner. The vehicle is open to inspection Monday – Friday 8:00 AM – 4:00 PM. The vehicle sale is subject to a minimum bid of $10,000. The bids will be opened on Monday 4/5/2021 and highest bid above the minimum sale amount will be awarded. Sealed Bids must be addressed to Fire Chief Keith Clonch at 11450 W. Sylvania Avenue, Berkey, Ohio 43504.”
The seller will sell all the jeeps for $7900. I’ve only posted on pic for each jeep. The pics on Facebook are not in the order described by the seller.
“I am selling off a portion of my Jeep/Willys collection. These are multiple projects that I’ve acquired. Typically, I had to buy everything to get the pieces I need.
Pictures 1-5: Late 70’s cj5 and a 57 Willys. No title on 70’s but 57 has a clean title non op in my name. 57’s body is beat. Tons of parts included $4000 for both
Pictures 6-9: 1947 Willys with v8 and early 50’s Willys with I6. 47 has a clean title non op in my name but the body is rusted. 50’s has no title but body is in much better shape. Both have overdrives. No idea on running condition. $2200 for both Pictures
Pictures 10-13: 1953 M38a1 with data plates and vin on dash and hardtop & doors. Never been registered. 1958 cj5 in pieces, but I have a clean title non op in my name. Wheels not included. $2700 for both. FB limits my post, so I can’t give all necessary info. Each package has tons of parts included. Spare engines, axles, body parts, etc. All prices are firm.
UPDATE: **SOLD** Was $3000.
(10/29/2020) There are pics showing various stages of work, so I’m unclear what the lasted pic is.
“1946 Willys CJ2A project Chevy 4.3 v6 Edelbrock carb and intake manifold 3” lift New brakes all the way around Ford power steering box Needs exhaust, distributor and drivelines Open to trades or cash offers, make me an offer worst I can do is say no”
UPDATE: Still Available.
(10/28/2020) The front frame rails/bumper area could use a rebuild.
https://www.facebook.com/marketplace/item/2467472860219346/
“Straight solid body. No rust”
Runs, needs work.
https://www.facebook.com/marketplace/item/961190601372348
“1946 Willys Jeep CJ-2A. Engine and drive train work, body has rust issues, windshield is broken. I think this is a fair price for vehicle’s condition. $4000 or best offer. This is the first model offered to civilians after WWII by Jeep.”
Runs, but needs work.
https://missoula.craigslist.org/cto/d/florence-46-willys-cj2a-jeep/7277505832.html
“This is a 46 willys cj2a. The tub is in great shape. The motor is a L head. It runs but needs work. It leaks oil and won’t rev up enough to drive. The breaks work but leak. I do not have a title for it the guy I got it from could not find it. You can get one going through the proper channels. I just never did it”
UPDATE: Price dropped to $10,500
(08/26/2020) As the seller notes, the tub was rebuilt, but not to original specs.
https://maine.craigslist.org/cto/d/eliot-1946-willys-jeep-cj2a-vec/7279118211.html
“L134 Go Devil motor runs well, rebuilt carb, new intake and exhaust manifolds, exhaust, radiator, hoses, starter, coil, battery, thermostat, all new brakes including lines and master, all new Walek 12V wiring harness, rebuilt steering box, removed tub to clean and repaint frame (394441) which was replaced at some point by previous owners. The tub was rebuilt by a previous owner and it you are a purest, it will need to have some rework. The 3 speed T90 transmission works, Dana 18 transfer case and Dana 41 rear is good. All gauges work however I have no documentation to confirm odometer.
Windshield is off 3A but have a 2A frame. I have the original air cleaner but prefer the K&N for better functionality. All fluids have been replaced this year and many seals replaced. That said, these Jeeps leak. Top speed is 35-40 mph. This Willys was manufactured in February of 46 so it would have had the column shift and been either Pasture Green or Harvest Tan. Found some Pasture Green on the underbelly. Looking for enthusiast who wants to take this restoration to the finish line”
UPDATE: Still Available.
(12/10/2020) Looks like this has potential.
https://missoula.craigslist.org/cto/d/missoula-1947-willys-cj2a-jeep/7280839810.html
“1947 WILLYS CJ2A JEEP
Runs and Drives
New Battery
Carburetor Kit
New Break Shoes
New Break Lines
New Master Cylinder
New Shocks
New Leaf Spring
Fuel Tank Flushed
New Exhaust”
No pics provided.
https://wyoming.craigslist.org/cto/d/rock-springs-willys-jeep/7280698312.html
“1948 Willys Jeep with snow plow. Runs well. Plow works well(has been updated). Has sat outside (has some rust). Seats need help.”
UPDATE: Still Available. Was $5000.
(08/17/2017) A few upgrades including the electrical and the steering.
https://phoenix.craigslist.org/wvl/bar/d/goodyear-1947-willys-jeep-for-trade/7283083713.html
“1947 willys jeep,been parked and covered for couple years,clean title.
will trade or barter for high end 12ga benelli shotgun.”
UPDATE: **SOLD** Was $3000.
Lots of custom work on this project.
“Body and frame with clear title are 1946 Willy’s
Running gear – 1986 Cherokee
Engine 2.8 V6 Engine runs fine but fuel tank not hooked up
5 speed manual transmission and transfer case
Tires – 32-1250s on 10″ rims
Lots of extra parts
80% completed”