UPDATE: **SOLD** Was $2000.
“for sale a 1948 willys jeep. Runs and drives. Has original flathead 4 cylinder and 3 speed transmission. It has had disk brakes put on the front axle in place of the drums. Not too rusty. $2000 or best offer.”
UPDATE: **SOLD** Was $2000.
“for sale a 1948 willys jeep. Runs and drives. Has original flathead 4 cylinder and 3 speed transmission. It has had disk brakes put on the front axle in place of the drums. Not too rusty. $2000 or best offer.”
“Hey, I have a 48 willys CJ2A I need a new front leaf spring for. I would like to buy them in a pair but I would take a single pack if thats what I can find. From what I can find they are all a 7 leaf pack from 1946-1964 and they will all fit”
UPDATE: **SOLD** Was on eBay
This was on ebay, but the bidding was cancelled. I thought it was an interest approach to building a jeeprod. Both the body and frame are home built.
“You are bidding on a 1947 Jeep Streetrod with a homebuilt frame and body. It has a speedway front suspension, with a 4-link coil over rear suspension. It is powered by a 350 chevy bored 30 over, a 2 speed powerglide automatic trans and has 308 rear gears. It has Jegs wheels and new tires. Everything on the Jeep is either new or has been rebuilt. It rides and handles good and is fun to drive. I have put about 500 miles on it since the build with no problems.”
UPDATE: **SOLD** Was on eBay
(08/15/2011) As the seller realized, it is never good to find a main bearing in the oil pan. This has the wrong tailgate, too.
“I have to get rid of my Willys to pay off my Rubicon, times are tuff. This is a 1948 Willys CJ2A it has a good deal of rust on some parts of the body, some of the pictures show the rust. I bought this car to restore it and add it to the Jeeps I own, but now I need the money to keep my Rubicon.The tires are not really any good, the motor is not in the best shape I took the oil pan off to see if it was a good idea to try and start it but I found what looks like the main bearing in the oil pan so I stopped work on it. I cant tell alot about the jeep, I think the seats I have for it are not correct, I dont think he gave me the correct gas tank. I do have a clear title, if the Jeep goes for over a thousand dollers I will throw in some extra parts I have for it, New wheel brake cylnders, Data plates etc.. If it sells for over a thousand dollers I will deliver it within 150 miles of area code 29680.”
UPDATE: **SOLD** Was $3000.
(06/21/2008) “1947 Willy’s Jeep $3000 or reasonable offer. 289 Ford V8 engine with overdrive. Clean, runs good. 72 years old and must sell. No trade”
UPDATE: **SOLD** Was $1000
The body is dinged and full of hay, but appears sound.
“This is an early 50’s Willy’s. Was running when it was parked about 5 years ago. Still runs on 6 volt. Would be a good project jeep. Price is $1000 obo.”
UPDATE: **SOLD** Was $4000
(06/09/2010) Looks solid.
“1947 Willys cj2a Jeep flat head 4 cylinder motor full roll cage,lots of chrome 2 speed warn over drive.Has been in storage since 1986 its time to let it go.6500.00”
UPDATE: Back on eBay
(08/15/2011) It needs work.
“i picked up a 1947 Willys jeep.”
UPDATE: **SOLD** Was $4500
(02/15/2011) HOG forwarded this. It sports an inline 6.
“You are bidding on a 1946 Jeep Willys. The odometer says 77036 miles, but not conformed since I am not the original owner. I can tell you that everything as well as all gauges work and Jeep runs great, it also has new tires as well as a new top. Wining bidder will have to arrange for pickup or shipping THEMSELVES. ”
UPDATE: Randy bought this. He said it came with a rare louvered hood. He has everything to put it back together, though the project will take a while to complete as he has another big project ahead of it. You can see his other jeeps here. Congrats Randy!
It appears to include a winch. There is value here.
“1948 jeep , willys flat fender, frame and body as in pic’s, no motor,or running gear $800 o.b.o.”
UPDATE: **SOLD** Was $3500.
All original except for the updated parts and the replaced parts.
“I have a 1947 Willys Jeep for sale. ALL ORIGINAL!! It runs great too!!!! Has 11″ brakes in the front and 10″ brakes in the back.”
It’s not 100% authentic, but it wouldn’t take much to be 100%. The front frame rails look unmolested and unbent. Strangely, there are no pics that show the sides.
“1947 Willys jeep CJ2A, completely original tub (body). built in MAR of 1946. originally a texas truck, moved to Missouri, until a close police officer friend of ours brought the truck up to canada. the truck is 100% authentic Willys Jeep (original body, motor and frame). Runs and drives well. driven daily, currently licensed and plated”
UPDATE: **SOLD** Was $4200
(04/01/2011) Looks nice.
“1948 Willy;s Flat Fender Jeep- 302 V8 Engine
Tilt locking wheel, extra fuel tank
New ragtop, IN THE BOX. Buckshot mudder tires.
Lifted, Lots of Custom work(rollcage, bumpers, dash and more!)
$4,200 Or best Offer ”
This is interesting. This used to be an extended CJ-2A, but has been cut back down to a stock size. The rollcage is only $50, which is a great price.
“Flat fender jeep body. Has the general rust under the passenger seat and drivers side. It was a rare long bed that in the 50’s I road in. But between then and when I bought it someone cut it down to a regular CJ2A size. the cut is just stitiched and needs finishing. Overall its not a basket case but will be a good project. I also have a roll bar that is custom for a 2A for $50 that is sitting on it and a windshield that needs the inner piece and a new panel across the front for $50. There are side diamond plate for the foot rest and along the side for $50 and some other 2A and 3A parts. I also have a complete project jeep for $1300. Body needs some work but for its age is better than most. You buy the project I will throw in the body listed above for any part it may need. I have L head motors that will need rebuilding for $300.”
UPDATE: Price dropped to $5995
(03/02/2011) This looks like a solid rebuild.
“Cherry 1947 willys CJ 2A; frame off restoration, bedliner underneath tub, 5000 miles on restoration/rebuild, new tires, wheels, full size spare and LED tail lights. Original running gear, L-head 4 cylinder flathead, wrapped in diamond plate, 12 volt system, aftermarket buckets and jump seats and full roll bar…this jeep is ready to go or rod it out and make it a rock crawler with an overdrive/underdrive. New starter, two new tops (full and binini–not currently on jeep). You will not find a nicer willys for the money! No rust, starts every time and gets lots of looks. Tow bar included. No tire kickers please. Rick in Bellingham 360-201-0682 ”
This appears in pretty good shape.
“1946 CJ-2A Willys Jeep all original runs great rebuilt motor vary good working condition. Also have the doors and other new spare parts such as carburetor, fuel pump, and some used parts also. Odometer says 38,183 miles.”
UPDATE: Was $6000. **SOLD**
This looks like a nice jeep.
“1948 Willys Jeep 4×4.
Has all original running gear except for 302 SBF motor and 3 speed manual Trans. w/overdrive.
Soft top, doors and Bimini top.
Truck has been inspected and has title.
This is a very solid truck.
Needs some brake work other than that in very good condition.”
UPDATE: **SOLD** Was $3200.
Needs a little work, but appears solid.
“1947 Willy’s Jeep. Runs. New tires. Will need some wiring done on the lights. Wires are there but shielding around them is dry rotting. Have original tires and rims that will go also. 3200.00 OBO. Serious inquires only.”
UPDATE: **SOLD** Was $3000
It’s a project. It doesn’t look like a ’43.
“1943 willys jeep with lots of extra and spare parts $3000 or best offer. call for any questions. bob”
UPDATE: **SOLD** Was $500
There is some value here.
“For Sale-1946 Willys Jeep. Old family jeep that hasn’t been run in 15 years. Engine is seized. Driver and passenger seat frames included (not pictured). There is no title but has been with the same owner for 28 years. Great project for a jeep person to spend your winter on.”
UPDATE: Price dropped to $1300
“1947 Willys Jeep flat fender 4 cyl runs great,6 volt needs batt. Can deliver for a fee. I also have a 1965 CJ-5 for sale as well. asking $1000. that one runs also. I will take $2000. for the pair. $600 off for buying the pair. call Damon 802-274-5723”
UPDATE: **SOLD** Was Make Offer
There appears to be some value here.
“Willies Jeep 47 CJ 2A for parts. offer.”
UPDATE: **SOLD** Was $1800
This is a column shift. This might be worth a look.
“1946 jeep willys cj2a 4×4 all original rare 3 speed on the column. Jeep runs been sitting needs a little tlc to get it road ready but not much. Very clean no rust no damage on it. Has a solf top with doors,needs fuel pump,gas tank and front windshield. This jeep would be good for hunting,offroad or just drive around town. It drives nice and runs good”
This appears solid.
“I am selling a 1947 willys cj2a jeep. The jeep is in great shape with very few dents and there is hardly any rust in the jeep. the floors are solid and in good shape. The jeep has 5 new military 600-16 tires, has new carburetor, fuel pump and all the fluids in the jeep have been replaced. The motor was rebuilt several years ago and runs great. transmission shifts through all the gears and 4×4 works good also. Jeep has a nice snow plow on it along with a set of chains. Jeep would be a very nice set up to plow your snow off your driveway in the winter or to restore!! The jeep is located in Crawford Colorado but I am delivering another jeep to Colorado springs area the 2 through 4th of September so I could deliver to the springs for $200 bucks.. if you have any questions please call me at (970-462-7760) Asking $3,000 or make offer”
No pics provided and needs some work.
“The older brother to the other CJ2A I am selling, this one is titled and under non-op status. It is also nearly complete but needs to be gone through stem to stern to make it road worthy. It has a few rust issues, unlike its brother. My intentions were to build one but they are both so good, each deserves a new life. I can send photos. If you buy both, plus all the extra stuff listed in the other ad, I’ll toss in a Postal jeep frame, an extra CJ2A frame needing only minor work, an extra bell housing and transmission housing and transfer case housing, gas tank, and other odds and ends all for $5000. That would give you a great start on a fleet of CJ2As!”