This sounds more like a parts jeep than a project.

“This is a project.Suspension is in good shape running gear is good motor is out of jeep and needs repair.Gauges are also missing,tires have air.Not a bad start.
208-315-5694”

http://boise.craigslist.org/cto/3183444179.html

UPDATE: **SOLD** Was $1000

(07/19/2012) Runs and drives.

“runs and drives, 4×4 works, brakes need bleeding and front bleeders have stripped, drivers side floor is bad bed also needs help willing to trade for other vehicles including other projects IF you can work out moving both vehicles, selling to try and avoid paying to have it towed to my new home in alexandria

interesting trades:
fiero
mustang/mustang parts
diesel anything”

UPDATE: **SOLD** Was $4500.

This appears to have a Warn OD.   I’m thinking it needs LOTS of TLC to be “Show Room”.

“RUNS GREAT WILL NEED A LITTLE TLC TO BE SHOW ROOM. DRIVE IT HOME CLEAR TITLE.”

UPDATE:  Price dropped to  $3000

(01/25/2011) I can’t tell much from the pic.

“1947 JEEP WILLYS. PRIMER RUNS GREAT. 289 FORD MOTOR SMALL BLOCK V8. 6 INCH LIFT 35″ BFGOODRICH TIRES. NEEDS BRAKES. ALSO HAVE 37″ BOGGERS WITH LESS THAN 50 MILES ON THEM BUT THE PRICE WITH BOGGERS IS 3500 FIRM OR 3000 OBO WITH 35″ TIRES. THE BODY HAS SOME BONDO BUT IS IN PRETTY DECENT SHAPE FOR A 1947 WHEELIN RIG. HAS A 3 SPEED MANUAL TRANNY. 9000 LB WINCH ON FRONT. EVERYTHING WORKS GREAT EXCEPT BRAKES. HAS A NEW MASTER CYLINDER ON IT JUST NEEDS SOME TUNING ON BRAKES AND BLEED LINES. PLEASE TEXT IF INTERESTED AT 425 269 9519 OR EMAIL ME. I WONT B ABLE TO ANSWER PHONE CALLS SO PLEASE TEXT OE EMAIL ONLY. THANKS”

http://seattle.craigslist.org/est/cto/3180591336.html

UPDATE: **SOLD** Was $3200.

(07/21/2012) I knew something looked odd about this.  After a couple moments I spotted the problem.  This actually has bow holders installed in the bow holders!  How often do you see that in a jeep, other than a perfectly stock show jeep?  If those are the original bow holders, then the seller deserves some kind of medal.

“I have a 1947 Willys Cj2a for sale. It has the original 4 cylinder with a 2.5 lift. 33 inch tires and full soft top. I have the overhaul kit for the transfercase and transmission(over 400 dollar value). The syncros are bad but the jeep does drive.”

UPDATE: **SOLD** Was $4500.

You’ll need a passenger side panel at the very least.  This appears to be a mix of parts.

“Well the last time this willys ran was 1996,I wanted to build it up 1. rblt a 231 buick,edelbrock performer manifold,390 holly 4bbl,msd high performance distribtor,headers,4core radiator,new fueltank
2.t15 syncro 3spd new bearings and seals new flywheel/clutch
3.dana 20 t-case new bearings and seals
4.front rblt dana 30 stock width 5.38 gears new 11″brakes f/r
5. rear rblt dana 44 stock width 5.38 gears/detroit locker
6.saginaw manual steering box
7.4″ lift re arched springs f/r
8. old 32-11.50×15 bfg mud t/a 1982 cj7 rims
Wife wants it gone and I havent touched it in 13 years.
what it needs to get finished,
1.damaged rocker panel cut out and stock replacment welded in
2.nice storage box welded in
3. needs all brake lines & hoses
4.needs battery and batt box
5.wiring is all there but needs hooked up
Super nice body not rusted out, bodywork and paint are in good shape, seats are good and have pass seat and rear bench.
This willys is a 1943 ford gpw with a cj3a body and windshield,it needs alot of work and alot of fit&finish but has alot of potintial
and a great 4wheeler.I think its well worth my 4500$ asking price
email with willys in the subject line please.
Sold as is where is with no warrantys or garanties,must be hauled away I have a title.”

UPDATE:  Price dropped to $2500

(04/29/2012) Looks solid.

“1947 Willys jeep 4×4. Has 60’s Mustang 289 V-8.
Runs good. Clean NM title.
$2700. cash/no trades.
321-7380”

http://albuquerque.craigslist.org/cto/3176472840.html

UPDATE: **SOLD** Was $5000.

Lots of work left here. I’m not sure where those side roll bars are heading.

“1946 willys jeep on 1974 running gear 304AMC 3 speed custom frame and body work needs to be finished 5000.00 takes it home.”

UPDATE: **SOLD** Was $3500

The seller thinks that’s a 3B windshield, but clearly it is a low hood windshield.

“Fairly original Willys for sale, except for wheels and windshield. Has an aftermarket 3B stainless steel windshield. Has the original flat head four cyclinder that runs just fine. Has a tow bar that works great if you want to pull it out with your truck or motor home, she tows great. I drive her daily to work in the summer, but top speed is about 45 and I take the back roads.

I do also have an original metal top for a 3B that has never been put on, its in restorable shape.”

35UPDATE: **SOLD** Was $0

UPDATE: **SOLD** Was on eBay.

The seller provides a detailed description.

“You are bidding on a 1946 Willys CJ2A. I picked this up a while back with plans of using it around the farm. I have since picked up a newer CJ5 that runs and stops so it is time to find this one a new home. Although not shown in the pictures I do have the radiator, fan and gas tank (stored safely indoors). The Willys came to me without a steering column, brake and clutch pedals or the arms that they attach to. I have a steering column (less steering wheel) from another Jeep along with some pedals and arms that I will throw in to the deal. I will also toss in a couple of master cylinders and a few other pieces I have around from other Jeep projects. You will need to come up with seats, a steering wheel and some small miscellaneous pieces.

As for the motor. A previous owner had pulled the motor for some reason and while it was in his garage it fell against the wall damaging the casting of the carb. I have the carb but my guess is that it is only good for parts. You will need to purchase a carb (they are on Ebay every week). The fellow that I purchased it from re-installed the motor with new motor mounts and I think transmission mount as well. The Jeep will also need an air cleaner. The motor turns by hand but I have made no attempt to start it. The transmission shifts through all the gears and the transfercase shifters seem to move as they should. Driveshafts are currently disconnected but do come with the Jeep.

The frame appears sound from what I can see. It is missing the rear crossmember/bumper but they can be purchased new. The front frame horns still have their gussets and the drivers side frame horn still has the metal data plate. The passenger side frame horn is dented a bit and will need some straightening (see picture).

The body is fairly sound for a 1946 Willys however it is not ready for any car show. The two body tags on the firewall are still attached. The front floor panels have been replaced at some time while the back end is original. The hood will need a little work but I think it is very savable as are the fenders. The drivers side might need a new inner support brace since it has some rust on the bottom. Tailgate is there but there and usable but not show quality. The grille is very nice and includes the sought after bullet shaped lights. The windshield frame is there and with enough time and talent it could be restored but there are better ones out there for the effort it would take. It does not come with the inner windshield frame. If you are not doing a 100% restoration I do have a couple of CJ3A frames that the winning bidder can purchase for an additional cost ($125 to $150 each depending on which frame you select).

The wheels are the sought after 16″ wheels. The tires are not worth anything and two have a slow leak. The front axle is equipped with Warn Premium Locking Hubs.”

UPDATE: **SOLD** Was $1500

“Selling a 1949 CJ-2A Willis military edition jeep. I have the title for it, but the jeep needs full restoration. Previous owner installed a diff engine which is an f head. For this reason the hood was cut and a custom hood scoop was built. However, if you desire to go back the full original, I do have the full original motor. The motor in the car, runs great and turns right over, however the clutch is seized. The frame is good, but the body needs some love. Looks like a lot of parts r from m38 military. Has a military top, gas can holder with gas can, and military cushions.”