UPDATE: Was $4000.

This has a variety of changes.

“1948 Willeys CJ2A Jeep for Sale . This is a CJ2A with a 3A winsheild , that has a rebuilt 225 “Dauntless” V6 motor , New T90 3 spd trans , a rebuilt large Scout transfer case , with a New Warn overdrive attached. The rear Dana axle has been changed out new and a “True Trak” posi track unit installed , also new at the time. The front axle has had new spider gears installed ,and the axle ratio is 5:38’s. As you can see by the picks it has (5) new BFG’s tires on white spoke rims. Bucket seats inside and the winsheild wipers are a custom setup off of a Suburau. I have owned this Jeep since the 80’s and was the one who had all the rebuild done on it . There is a driver side saddle & rear gas tanks, also some spare parts , like a pedal assembly and a new cowl rubber seal and many misc. parts to go with it . The rear seat is also a storage box.
It is in need of a top , paint , and a good home! Motor is strong , runs good and Jeep is road ready . I am asking $4000.00 OBO”

UPDATE: Price dropped to $1500.

(01/23/2014) It’s a project.

“This is a 1946 willys army jeep. Will need to be restored but this is the real army jeep you always saw in the movies. Dress it up and you’ll have a gem. It does have a clean and clear title. Good luck”

http://tulsa.craigslist.org/cto/4311334659.html

UPDATE: **Status Unknown** Was $5500.

(01/29/2014) This looks solid.

“I’m selling my 1948 Willys CJ2A in MB dress. This old girl runs and drives great through all three gears, high ands low range, 2 and 4 wheel drive. PTO winch works like a champ. Everything is there, needs nothing to drive, street legal, with CLEAR TITLE in hand. The body has rust, as with any vehicle of this age, but it is still solid.”

UPDATE: Was $1000. **SOLD**

(01/22/2014) Unclear how much value is here.

“ran when parked radiator gone the rest is there turns over tires up.”

UPDATE: **SOLD** Was $2400

(07/12/2013) It doesn’t run.

“1946 Willy’s CJ-2A – Jeep. 3 speed manual – Buick 225 V6 conversion – currently not running. DMV registration is all current – no back fees. ”

This looks like a great price. They look more like 3As.

“42 jeep willy has flat head 4 in it. 47 has two v6 pontiac motors. spare parts also. for more information contact Mike five4one five6one one6eight0”

http://eastoregon.craigslist.org/cto/4306171193.html

UPDATE:  **SOLD** Was $3000

This may be worth a look.

“1946 Willy Jeep, vinyl top & tow bar. Great for hunting & off road travel.”

UPDATE: **SOLD** Was $7800

(01/11/2014) Lots of updates to this rig.

“1947 flat fender built from the frame up. It is equipped with a new Chevy 350, holly projection fuel injection, HEI distributer ,T18- transmission ,
Model 20 transfer case, Dana 44 front and rear,Detroit lockers front rear, on board air,8000lbs warn winch, 33”x12.50”supper swampers,
Jeep wagoneer springs, large fuel tank, full cage, best top full top( in good shape)collector plates. Great wheelin rig”

UPDATE: **SOLD** Was $4195.

The body is painted with rhino covering.

“1948 Willis
4.3 liter
Throttle body Fuel injected
Came out of an early 90’s truck

Rhino covered in red
New top in 2006. Zips all around
Off Road
On Road
Deer Camp Special
Street Legal
Please call or email for info”

It needs some work.

“I am looking to sell my jeep. I have owned it for about 10 years and looking for something different. Nice shape but the master cylinder is leaking, and it needs a battery.I have a lot of extra parts. Engine has very low miles on complete rebuild and trans and tranfer case were gone thru also. I have advertised before and have had some interesting trade offers. Kinda wanting a vette or mustang , camaro, convertible, something like that. Also have a 28 International rat rod pickup project for sale or trade also. Very good project with a lot of patina. Email with ph. # for reply. Iwill not respond if I don’t think you are for real.”

http://desmoines.craigslist.org/cto/4307825885.html

UPDATE: Price dropped to $800

(01/19/2014) Looks like a project.

“Gm iron duke 4 cylinder engine. Does run. Needs some steering repair. Has aluminum hard top. Call for details
Scott
541-968-8425”

http://eugene.craigslist.org/cto/4293542871.html

UPDATE: **SOLD** Was $1500

(08/20/2013) This is a project.

“Project Jeep needs to be put back together.Rebuilt Ford 260 v8 with aftermarket cam and 4 barrel carb. Less than 10,000 on engine.Runs great.T-90 transmission needs to be rebuilt.Transfer case works good.Has Pinto steering column and Saginaw steering box.Electrical system is 12 volt.Brakes are 11″ drums and duel master cylinder.Needs top.Have brand new electric wiper motors.Comes with extra windshield,grille,front fenders,3 tailgates and extra complete front and rear axles.”

UPDATE: **SOLD** Was $600.

It’s a project. It has three data plates, so this is probably a 1946.

“For sale: 1947 Willies Jeep. Sell for parts has no title. Also has an extra transmission and transfer case.”

UPDATE: Still Available

(10/10/2013) The body isn’t the prettiest, but underneath it sounds like a fully capable trail jeep. It includes extra parts.

http://seattle.craigslist.org/est/cto/4301884656.html

“1946 Willys 283 V-8 with headers and dual Vortex(similar to Fowmaster exhaust all the way to the rear)
Dana 44 Full floater Rear with 5.38s Powerlock 11×2 brakes,
Dana 25 (or 27) Front, 5.38s and Ford Disc break conversion,
Full Cage,
Full Trail top(not pretty but functional)
Bikini Top
Engine driven On Board Air setup with 2.5 Gal tank
CB
AM/FM Cassette
Toyota Supera Seats with neoprene covers
New Poly gas tank installed 5 years ago
CJ rear seat (needs cover) with underseat tool box with tools and trail spare parts
Power Steering
Tilt-Telescopic Caddy steering column with GT steering wheel
Brake line lock
Hand throttle
Rear Jamboree rack with spare tire holder, cooler holder and High lift Jack mount (jack included)
Set up for Removable style cradle winch mount front and rear.
Fiberglass Bubble hood, very rare as you hardly ever see them
Rear Missing link style suspension set up to increase travel
Rancho 5000 shocks
34×10.50 LTB tires with almost new tread and Black wagon wheels, spare Black wagon wheel for spare tire
New clutch, pressure plate, throwout bearing and pilot bushing, installed
T-18 (6.32:1) with D-20 single stick (2.46:1 gears mated up to a Lakewood bell housing with scatter shield just installed.

Continue reading →