UPDATE: **SOLD** Was $4000.

(12/28/2016) Has some updates.

“Orange with black interior, 283 Chevy motor, 4 wheel drive, manual transmission, disc brakes, radio.”

Looks like it has some parts value. Lacks a floor. Seller believes it is an M-38A1.

“I’ve got a 1955 Willy’s M38A1 military jeep for trade. The motor turns, it’s a roller as it sits, and it would make a great project. Don’t have the time for it as I thought I would have. Have 4 kids. From the firewall to the front is complete. From the firewall to the back needs a new body pan. I would like to trade for a snowmobile trailer, snowmobile, dirt bike, atv, a stand up jet ski, or FOIDS. Open to full size sleds/atvs/dirt bikes as well as kids sized (50cc +). Name brand only. Email with any offers or additional questions. ”

http://chicago.craigslist.org/wcl/cto/5954293884.html

May be worth a look. It might have a saginaw steering box.

“REBUILT, RUNS GOOD, ALL STOCK EXCEPT 12V WITH ALT. BIG WHEELS AND TIRES.”

http://phoenix.craigslist.org/cph/cto/5946931689.html

UPDATE: **SOLD** Was $2000.

Runs,

“1947 willys run good works good was air force jeep. ”

there could be value here under the snow.

“have a 46 jeep for parts. is a complete jeep but body is in rough condition. head is of engine but is there. lot of good parts for some one that has one .trans, transfer case, front and rear diff, radiator ect it could be restored if someone wanted one but would have to get a title .i do not have one so that is why i am listing it for parts asking 600”

http://nmi.craigslist.org/pts/5943117776.html

UPDATE: Still Available.

(12/14/2016) Terry has this project for sale.

“For sale as is, will restore for you or will build to your specs. 1946 Willys, CJ2A, S/N 42426. This is an early CJ2A and is one of the first floor shift units. A quality, complete restoration of the following components and system has been completed;
Frame
Both axles, keeping the original ratios. The rear is equipped with a Lock-Rite locker.
Suspension systems
Steering linkage and steering gear.
Brake system
Brake/clutch pedal systems
Transmission and transfer case
Drive shafts
Re-cored radiator
Generator, starter, carburetor, fuel pump and distributor.
The frame, axles and drive shafts have been media blasted and coated with Rust Bullet and premium chassis paint.
The body tub, front fenders and tailgate need replacement. The grill, windshield and hood are in good condition. The jeep is very complete with very few of the original parts missing. The motor turns freely and is definitely restorable. This is a one-owner jeep. This is a great jeep for an accurate restoration. Total investment so far, not including labor, in excess of $6500. Please check out my FB page, Buege’s Classic Jeep & 4X4 to view some of my other projects. References are available. I look forward to answering your questions.’

http://minneapolis.craigslist.org/hnp/cto/5916710085.html

Seller notes this is a five speed. It’s a non runner.

“Manual Transmission (5-Speed)
Antique Car
Battery Dead needs to restart.
Haven’t Driven it in more than 1 Year will need work if desire to drive it”

http://losangeles.craigslist.org/sgv/cto/5948481910.html

Has some mods.

“1948 Willy`s jeep at a great price with very little rust. It is still all arigonal except the motor which has been switched out to a v6. Still has 3spd trans. It has a soft top, new gauges, clean interior, tires have very little use. Been kept garaged when not most of time. Dont use it much so time to sell and let some one get some use out of it”

http://detroit.craigslist.org/mcb/cto/5950826486.html

UPDATE: **SOLD** Was $1300.

Has some Allstate hubs.

“I have for sale this little CJ2A Runs and moves, is a bit rough but complete, has had an F-head engine transplanted in in place of the original L-head, has 16in. wheels, Sears Allstate locking hubs. 4wheel drive all works good, etc. Have title. ”

Project or parts.

“Yes it is rough but it is complete and has a lot of great parts. comes with a “go devil” flat head 4 and 3 speed transmission. engine was running in the last year. new gas tank and other new parts. fenders, hood and grill in good condition. Seat frames and storage box still good. Frame is good was blasted and re-coated. Windshield frame is usable missing one glass but still has rear view mirror and wipers. Make a great restoration project or farm vehicle, or rat rod Cj”

http://lakecity.craigslist.org/cto/5950638627.html

UPDATE: Still Available.

(12/12/2016) Has a variety of updates. It looks like the gas tank has been moved to the rear.

“Runs great, 225 V6, 3 Speed, lots of new parts.
Tires shown do not come with Jeep, she now has a brand spanking new set of Federal Couragia Mud tires.
Pretty much set on price.
May consider trades for great Toyota 4×4 or military truck.”

http://portland.craigslist.org/mlt/cto/5950950187.html

UPDATE: **SOLD** Was $3000

It’s a project. Has some parts value.

“Price is 3k or best offer. Doesn’t run.
If you’re looking at this ad you likely know about these trucks.
Comes with aluminum artic top set. 78 mustang v6 engine, top loader 4 speed, offset t-case, warn overdrive, cj5 rear 44, cj5 front 30, 3.73 in both. Dual custom stainless fuel tanks under seats. Other bits and pieces. Price is delivered anywhere in the valley. Send a message if you’re interested.”

UPDATE: **SOLD** Was $2500.

Doesn’t run.

“1947 Willys Jeep CJ2A is not running but would be a good project. Tub is in good shape and comes with a pto drive.”

UPDATE: **SOLD** Was $4000.

(01/06/2017) It can climb a log.

“1947 CJ2a, 283 v8, th350 Automatic transmission, front disc brakes, PS, Front and rear lockers, 5.38 gears, custom tube frame, Rancho Suspension, Holley 4 barrel, Edelbrock Intake, 33×12.50 on classic mags. Built for the river.”

Seller started with a pretty rough project.

http://baltimore.craigslist.org/cto/5942980418.html

“I went over the frame fixing cracks and old repairs. I also boxed the frame for strength. Then I coated it with POR15 and topcoat

Mostly all new sheet metal. I rebuilt the body using some of the original parts but the original metal was mostly used as a template. I used a thicker gauge metal than the stock and I added reinforcement metal into areas that were badly rotten. For instance, the hat channels are made from C-channel stock rather than stamped sheet metal. I used diamond plate steel to create the driver/passenger floor. I did this for strength and so your feet aren’t slipping around when wet. The windshield frame and window are aftermarket and the tailgate was on the Jeep when I got it but I don’t think its original.

After the extensive re-crafting of the body, I used seam sealer on every area metal came together. the bottom of the body was coated in etch primer then a ceramic coating was used to protect the metal from rock chips or road debris. Then it was primed and painted with color and clear. The upper body is near perfect. Etched, primed, color and clear. In between coats, it was color sanded, cleared and a cut and buff. I used Moss Green Pearl for the body color and a “broken star” pattern with a bright white and white ice pearl. Really cool looking.

For the wiring I used Painless wiring with a blade fuse block.
Autometer gauges monitor the Chevy 4.3 V6 engine.
I used a MSD 6A ignition box and MSD Blaster coil to fire the MSD distributor
The ignition box and coil are mounted under the dash with a coil wire pass-thru in the firewall.

I cut a sump into the fuel tank. I sealed and treated the tank with a POR15 tank kit. Braided stainless hose and Areoquip fittings feed the Holley Blue pump and the Holley carb.

Through the fender headers, Magnaflow stainless mufflers and the hand made exhaust were Jet coated and should last for a good long time.

The engine is cooled with an aluminum Edlebrock reverse flow water pump, aluminum radiator, and an electric cooling fan.

The engine mates to the original F-script transmission and transfer case with an advanced adapter bell housing and a GM clutch.

The Jeep needs a few things to be 100% but I don’t want to take ALL the fun out of it for someone else!

There really isn’t a way to gauge a price on something like this. I had this for sale previously asking 20k obo. and received tons of emails and calls but no buyer. No one wanted to negotiate! 🙂

Lets try this again, $19,500 OBO.”

Seller started with this:

And now it looks like this:06

UPDATE: Still Available.

(11/18/2016) Needs some brake work.

“so Im selling my Baby 1946 CJ-2A Willy’s jeep. the Original Jeep. its right around 90% restored a few things left like replace the gauges in the dash and the break lines need attention there cracked and wont hold pressure. easy to do I just dont have the money to put anything else into her. I’m the second owner of her and its a blast to drive. ask me anything I can give you a answer. we painted her army green and put on a cab cover that snaps on or off. the tool box is intact and it has the original flat 4 block in her.
Im selling her because I got laid off and need to make mortgage simple but true.”

http://boise.craigslist.org/cto/5947455499.html

Looks like it was barbecued.It runs.

“Runs needs some work”

http://joplin.craigslist.org/cto/5946573252.html

There might be some parts value here.

“i have a rough 1947 willys jeep for parts. complete jeep without windshield and water pump.and radiator. Wrong engine, fhead. best cash offer. want gone soon. I am going to scrap in about 2 weeks if not gone. come and take a look.”

http://siouxfalls.craigslist.org/pts/5942757610.html