UPDATE:  **SOLD** Was $3000.

This does have an engine, but the block has some cracks.

“FOR SALE – 1948 CJ2A with title $3000 obo. I have a solid rolling chassis with very good body. This would make a great project jeep. I want to keep this a package deal, so bring your truck & trailer. The frame has been sanded and painted, I also replaced all four brakes and wheel bearings and have receipts. Three motors are also included, they are all disassembled and have been hot tanked. Skid plate and rear bumper have been powder coated. Loveland, Colorado PM if interested 1. L-134 Has a few small cracks in the block, head is good. 2. L-134 Block has thin walls, will have to be sleeved, head is good. 3. F-134 Block also has thin walls and will need to be sleeved, head is in real good shape. • T-90 Transmission • Dana 18 Transfer Case • Dana 25 Front Diff. • Dana 41 Rear Diff. • Steering Assembly • Front and Back Seats • Radiator & Shroud • Misc. Parts • Parts Book & Service Manual”

It’s a non runner with some mods. It’s got a V6.

https://www.facebook.com/marketplace/item/1211355422369290/

“For sale is my 1950 willys cj3a Neat piece of history. Not perfect but a cool Jeep for sure! It deserves some love and is a worthwhile project. I have a CLEAN TITLE in hand Years ago it was swapped with a Buick V6. When I found it he said it had a bad u joint and hadn’t run for years! I bought it for decoration in front of my cabin, and taught my brother how to paint on it. We painted it Forrest green metallic A little while ago and it looks awesome! It has a couple rust holes, and bondo in one spot. It does have lots of dents, scrapes etc. but looks good and be awesome to drive around! I have since bought another willys that runs and drives and am gonna make that my cabin Jeep! It does not run from sitting, but I’m sure with some effort this Jeep could run and drive around and provide lots of fun. I have brought it home to Tooele to sell!’

UPDATE: **SOLD** Was $2000.

No description provided. It’s a project.

U)PDATE: Price dropped to $2087.

(03/12/2019) This has a variety of mods.

https://www.facebook.com/marketplace/item/1245076662332831/

“1946 WILLYS JEEP HAS V8 CONVERSION 350 TURBO AUTO TRANS ROLL CAGE LIFT KIT GREAT PROJECT MUST SEE ”

UPDATE:**SOLD**. Was $2500. Has an early grille.

(01/30/2019) Will need some work, but runs.

“Runs and drives 4 wd works starts right up original go devil engine. 4 original 16″ Jeep rims come with it. Needs floor pans and body work of course.”

UPDATE: **SOLD** Was $4800.

(04/28/2019) Has a few mods, including modified steps.

“1946 Willys CJ-2A
Runs and drives great!!!
Currently registered and insured
Engine rebuilt and like new
Trans rebuilt and like new
NEW PARTS
New gas tank /filler neck/ gas gauge/ gas cap
New master cylinder and brake cylinder
New brake lines and hoses
New cluch pedal and cross shaft
New water pump
New 12 volt 1 wire alternator
New head lights
2 new rear leaf springs and bushings and u bolts
4 new tires
Jeep also has excellent front seats and folding rear seating
Tilt steering wheel

5000.00 Price is negotiable but not over the phone must come and see first. This is a more than fair price . And I don’t need help selling”

Runs and drives. Looks like there’s some passenger side body rust.

https://www.facebook.com/marketplace/item/679449419144978/

“willy’s jeep fair condition for age runs .drives .new tires. has title . 3 speed flat head 4 cylinder”

UPDATE: **SOLD** Was $2250.

It’s completely disassembled.

“1948 cj2a, everything is here. I started the restoration and just can’t find the time to finish it. The frame is restored. The tub is in great shape and all the small parts are bagged and tagged. Price is firm open to trades”

Lots of parts jeeps.

https://www.facebook.com/marketplace/item/1093869420801581/

“Three Cj2A Willy’s jeeps for sale One of them was complete when I bought it I took it apart and started restoring it the original engine was froze up on it there is another motor to go with it that turns over I was told by previous owner it was a crate motor. The body tub is rusty but could be fixed the other Jeep jeeps are just for parts one has an aftermarket engine with no transmission body could probably be patched up on it also the third Jeep is not restorable it has good axles, hood and fenders I would like to sell the whole lot but I might part out $1800”

UPDATE: Price dropped to $10,900.

(05/27/2019) Has a few updates. The top is unusual.

https://www.facebook.com/marketplace/item/675498022902991/

“Original transmission engine.”

This was a part of a moving sale back on June 1st. It’s got a modified passenger side. I don’t know if it is available or not, but you can always try messaging the seller.

https://www.facebook.com/marketplace/item/296851491259755/

Has no title.

https://www.facebook.com/marketplace/item/733895880363760/

“1946 Willy’s CJ-2A. Good for parts or full restoration. Factory running gear, flat head 4 cylinder “Go Devil motor” and Dana drive axles. Cool little Jeep. $750 or best offer. Do not have title”

Has rust. It’s supposed to run.

https://www.facebook.com/marketplace/item/403239656939420/

“1947 Willis Jeep have the title all original except the grill runs and drives 1500 a best offer for trades of equal value boots ATVs bikes motorcycles etc”

UPDATE: **SOLD** Was $3420.

(04/10/2019) It’s listed a 1945 CJ-2A, but it’s a mix of parts at this point.

“1945 Willy’s CJ2A project I got in on trade. Chevy V8 swapped, Muncie 4 speed trans, Dana 18 transfer case, axles from an early CJ3A, and 34” TSL tires. Comes with CJ2A fenders and grille with new aluminum radiator, one M38 grille, two M38 windshield frames, one windshield glass, cold weather defroster box and rail on one of the windshields, one CJ2A “Willy’s” stamped hood and one M38 hood, CJ2A “Willy’s” stamped tailgate, aluminum dash plate and gauges, CJ5 wiring harness, one CJ5 front seat and CJ5 bench, custom seat frame and roll bar, and some other misc items like hardware and exterior lighting”

UPDATE: **SOLD** Was $11,000.

Appears solid.

“1946 Jeep Willys fully restored in 2015 new wheels and tires in 2016. Runs great and is garage kept.”

UPDATE: Still Available.

(10/31/2019) Looks solid.

https://westslope.craigslist.org/cto/d/durango-1946-willys-jeep/6907105471.html

“Jeep is in good condition. Lots of extra parts, manuals and set of wheels with military tires included.”

Includes a DVD of this jeep going over the Rubicon. Needs master cylinder fixed.

https://spokane.craigslist.org/cto/d/spirit-lake-1947-willys-overland-cj-2a/6914406334.html

“1947 Willy’s Overland CJ-2a Jeep

Veteran of 5 trips over the Rubicon Trail, ‘the Hard Way’!

• 225 V-8 ‘Odd-Fire’ GM Engine, Rebuild has less than 2,000 miles on it!
• Engine had Complete Rebuild – Bore = 10% over – Tight!
• Weber Carburetor – Baffled for running on “extreme-tilt” terrain!
• Dana-40 Heavy-Duty Rear End!
• Posi-traction in Rear End = 110# torque to break loose = “Tight”
• 11” Brakes installed from ½ Ton! (9” is standard on the Willy’s)
• Warn Hubs on Front Wheels.
• Electronic Ignition installed = ‘no points to mess with’!
• Original 3 speed floor-shift with 1st being a ‘granny-gear’ for ‘walking’.
• And….has a Back Seat!
* Full Roll Bar with added Seat-Belts
• All ‘Steel’ original body!
• Have extra parts, i.e. Original ‘stick’ hubs, soft-top frame + doors, 15” wheels, extra drive-line shaft, extra rear-end pinion, etc.
• Comes with a “Clean” Title!
Continue reading →

UPDATE: **SOLD** Was $3850.

Though it has the driver side spare tire mount, I do not believe this was a lefty. It appears the original holes for the front bow holder are still there.

“1948 Willys CJ2A for sale. L-head motor. All brake lines and wheel cylinders have been redone. New brake master cylinder, converted to 12v. New gas tank. Reupholstered seats. Tub is in pretty good condition. Runs well. Call for more info or if you would like to come take a look”

UPDATE: **SOLD** Was $700.

(07/25/2018) Not sure how much value is here.

“Decent body, chassis, roll cage. Tub has had the floor repaired, new fuel tank and has lifted suspension under it. Had a chevy 6 cylinder in it last. Last owner cut the hood for stacks, but will be easy to repair. All body edges are good, has a few rust spots that will be easy to fix. Steering column is there. Have a bench seat that fits well. Was going to build, but might clearing out projects.”