UPDATE: **SOLD** “Was $6800.

Appears worth a look.

“For Sale
1947 Willys Jeep CJ2A
Very solid unmolested body and frame.
Very rust free except for usual spots in front floorboards.
Excellent running original engine. (No Smoke)
Runs, shifts and drives very good.
Work done and parts included
New correct jeep wheels
New military style tires
New spare tire carrier
New brake master and wheel cylinders also all steel and rubber brake lines
New windshield frame
New wood blocks for on the hood
New rubber seals for windshield and windshield frame
This jeep is an excellent candidate for a restoration or just fix it up a little and put it on the road as it is.
Asking $6800.00”

This lacks a driver’s side fuel inlet hole.

https://www.facebook.com/marketplace/item/583234059183767/

“Rust free 1948 jeep willys new everything from brakes, wheels, tires, sheet metal on body windshield frame, clutch springs, shocks radiator, starter, intake and exhaust manifold, head gasket, water pump, oil pump, bumpers, steering wheel and more, runs perfect, 4wd works, needs lights wired and fuel tank. Runs drives and stops perfect”

Maybe some value here?

https://www.facebook.com/marketplace/item/537948530143062/

“Motor ran when parked in shed. Body needs repair from firewall back. All there with hard to find air cleaner. Motor rolls over, not seized. Frame good. Has a half cab without doors. Clean green title.

Also have a complete running gear without radiator, motor seized. Has very straight frame with factory bumpers. No body. Has frt. Fenders and hood. Will sell separately Or as package deal”

Hasn’t run since 1997. This might have a Porter & Reed hardtop.

https://www.facebook.com/marketplace/item/498824810742316/

“Make an offer. Pm if interested. Willy’s jeep flat fender all there was in running condition when parked in 1997”

Continue reading →

UPDATE: Still Available.

(12/26/2019) Has a variety of mods.

https://www.facebook.com/marketplace/item/991256371250229/

“1948 willys cj2a · Other_body_style · Driven 300 miles 289 conversion 3inch lift upgraded gauges updated wiring harness led light bar,and much more needing to buy a home force’s me to sell price is or best offer”

UPDATE: Price dropped to $10,000

(08/19/2019)

https://www.facebook.com/marketplace/item/2711992145501825/

“’48 Willys CJ2A Jeep with original Flathead 4 cyl engine, oversized tires and roll bar. Runs great and needs only some cosmetic fixes (wiper, passenger side mirror and choke cable).”

Lots of mods to this jeep. The rear PTO bar has been accessorized a bit.

https://www.facebook.com/marketplace/item/472667696982553/

“OR SALE 1948 WILLYS Solid starting point for a PROJECT. 283 with LT-1 intake, advance adapter headers, advance adapter side pipes, 2 piece scatter shield, Muncie 4 speed, warn overdrive, Dana transfer case, custom built front and rear drive shafts, Dana front with a DANA 60 rear (yes that is a 1 ton rear end) end both sporting 5:38 gears. Locking hubs on the front. GM steering box and column, Hurst linkage, 2 10 gallon fuel tanks. Sand roll bar with a full cage. Same owner since around 1979. I wanted to rebuild it to it’s former glory but just don’t see it happening.”

Runs, but not road worthy. Has Suzuki Samurai axles.

https://www.facebook.com/marketplace/item/552624562252854/

“Note: … It Runs now. Still nds work but moves under it’s own power! if u see this ad, YES its available. ….47 willys jeep, Cj2a. Awesome shape, see pix, no rust bucket here! Has tasteful mods. But not hacked apart like most. Original flathead 4cyl. Engine. Samurai axles, disc brake front. 4″ superlift springs, Gm tilt column, 12v conversion. Was a great ol’ huntin rig. Got put in barn for last 5 to 7 yrs. Got it running still needs dialed in. So No u can’t *drive it home sorry. Have clear title in hand. Price is $3900 cash only, no trade. Go see the rest and you’ll realize its a good deal on this 1! Bring trailer and cash if u want to check it out.”

UPDATE: **SOLD** Was $3000.

(12/08/2019) It’s a big project.

“1948 Willy Jeep Great project if you are interested in setting up and creating your own ride. All parts are here just no time to do the project, looking to clear up garage space. Pink slip on hand. I have engine, transmission, bell housing, hood, windshield, all part to complete the build.”

UPDATE: Still Available.

(12/30/2019) Might be a good price. Will need some work.

https://cars.ksl.com/listing/6098199?ad_cid=12

“1948 Willy’s. 4000 OBO
Overall, pretty impressive for a 71 year old vehicle. Starts, runs, and drives. I’ve taken it in multiple long drives.
With that said, there’s a few thing that need attention. The clutch, although it works, makes a sound. I bought all new clutch parts but haven’t installed. Throw out bearing, forks, cables, clutch, etc.
The brakes recently stopped working and I haven’t had time to look at it. Up until very recently they worked.
One of the pictures shows the exhaust manifold which smokes a little bit when you first start it.
I also have a newly rebuilt carter carb that’s original but there’s an aftermarket one in there now. It works fine but I wanted original. So I’d send you with the new clutch and carb.
I know it’s not perfect but a great Jeep that just needs some attention I don’t have time for.”

UPDATE: **SOLD** Was $1000.

Appears to have a modified WW2 body. Not sure how much value is here.

“Clean title set up for v8 no engine or trans fiberglass flip hood headers radiator steer gear and pump for v8 with it body is rough comes with a 4cyl Mercedes diesel out of a 240d around 10k on rebuild the plan was manual trans with samurai t case firm on price”

Project or parts.

https://inlandempire.craigslist.org/cto/d/riverside-1948-willys-c2a-project/7052113685.html

“I have a project that I never took on and it’s time to find someone who can put the time and effort into this vintage classic.

It will need to be hauled away by buyer.

Come take a look at this Willys which has lots of potential.
$1000 or make me an offer.”

UPDATE: Price now $5000.

https://portland.craigslist.org/clc/cto/d/saint-benedict-1948-willys-jeep/7050626592.html

“Starts runs and drives”

Continue reading →

UPDATE: **SOLD** $6200

(10/18/2019) Has an inline 6, but it doesn’t look to me to be a spitfire.

“1946 cj5 jeep, all has been replaced, motor rebuilt,all new brake system, new clutch/ and pressure plate, new tires etc, too much to list. this is a must see jeep,”

UPDATE: **SOLD** Was $5100.

(02/13/2019) Body exterior has been body-lined.

“1948 Willy’s CJ2a Jeep. The entire exterior has been rhino lined so it will last forever. The underside has been painted with a truck bed liner for protection as well. New larger gas tank has been added as well as plastics race seats. New wiring harness has been added along with LED tail lights.
The Jeep runs and drives but could use some general upkeep and maintenance. Very easy to work on as there are obviously no computers or major electronics to deal with. Perfect for someone who is just starting to work on cars. This Jeep was my granddads and I have loved making it mine, but it’s time to move to a new project. This Jeep is sold as is and buyers will be required to sign a bill of sale”