UPDATE: Price dropped to $10,000
(02/14/2021) Appears solid.
https://www.facebook.com/marketplace/item/729160594442626
“**Jeep now running** Selling my Dads 1948 Jeep Willys. Lots of work has been done all with documentation.”
UPDATE: Price dropped to $10,000
(02/14/2021) Appears solid.
https://www.facebook.com/marketplace/item/729160594442626
“**Jeep now running** Selling my Dads 1948 Jeep Willys. Lots of work has been done all with documentation.”
UPDATE: Still Available.
(02/27/2021) Not sure how much value is here, but the body is a VEC CJ-2A.
https://memphis.craigslist.org/pts/d/memphis-willys-jeeps/7276024193.html
“Willys Jeep parts cj2a mb No hood no fenders no grill not windshield frame no tailgate no steering colum CJ5.”
This may have some rust along the passenger side.
https://www.facebook.com/marketplace/item/433490464608098
“1950 Willy’s CJ3a. Runs good. Changed to 12 volt with alternator. Pertronix ignition. Brakes work. New top and tires”
Those front frame rails have been through some surgeries.
https://www.facebook.com/marketplace/item/172633707884590
“What you are looking at is an original CJ2A willys Jeep. The first of the civilian Jeeps made. The old jeep is complete for the most part. I have a windshield for it. The engine compartment is also very complete with the original 134L flathead 4 cylinder and the T90 3 speed transmission. The Jeep doesn’t currently run.”
It’s not clear to me what still needs to be done besides paint.
https://palmsprings.craigslist.org/pts/d/yucca-valley-1948-cj3-willys-jeep/7292085655.html
“1948 CJ3 willys jeep unfinished restoration, completely restored and boxed frame, restored axels and driveline, turbo 400 transcend 4.3 chevy V6, none of the running mechanicals- {have even gotten fluids yet}- late 40s willys tub-tailgate,hood and grille, flat fenders. rear axle is set up like the front , for freewheel locking hubs for easy towing. this project is 85%finished, giving you a drive it next month if you’re a novice, or a pro would take a week at most.if you are calling for specific parts have in mind your offers, “before you make your voice call””
This is worth a closer look.
https://www.facebook.com/marketplace/item/185147146492476
“1947 Jeep Willys. Runs and drives. Original online 4 cylinder with 3 speed and 4wd. The original color was red so I think it might have been issued to a fire department. It’s like an old Harley, it will leave its mark in your driveway. It’s been coverted to 12v.”
UPDATE: **Sold** was $1000
(02/18/2021) This has a DJ-3A body on it.
“Year: 1946 Make: Jeep Model: Willys 1946 Cj-2a frame and drive train with a 1952 Dj tub. Engine will run but it needs a starter and generator rebuild beforehand. Frame has some rot on the inside. Tub has rust holes and body mounts are mostly gone.”
UPDATE: Still Available.
(11/10/2020) Lots of mods.
https://sacramento.craigslist.org/cto/d/vallejo-willys-jeep-cj2a-flat-fender/7290408896.html
“350 Chevy powered classic flat fender. Muncie SM420 4 speed transmission (granny low,) Spicer 18 transfer case, full width Dana 44 axles with air lockers front and rear, onboard air, forged aluminum wheels (incl spare), one piece hood and fenders for much easier engine access. Those are the big upgrades, but there are lots of others – too many to list. The front seats are shabby, but I have a set of good condition, cloth seats from an early model 4runner (the ones that had a physical therapist on the design team – wayyyy better than the Ricaros.) Also have a spare SM420 (no, I don’t want to sell it separately) and a full cloth top. As you can see, the paint needs some help. The floor pan has all been replaced with heavier gauge sheet metal, but it’s also due for fresh paint. Runs strong, but could use a carb expert to get it dialed. Had to move in with elderly parent and don’t have room or time for all the toys, so it has to go. The best way to get in touch is to email me your phone number. Offers from people who have not come to take a look in person will be ignored. Clean CA title in hand”
This rebuilt CJ-2A has a fiberglass body.
https://www.facebook.com/marketplace/item/287802496099198
“This jeep has been with me over 12 yrs it is titled and platted in fl it has a built v-6 a 4 speed manual w- creeper gear it has it all from aluminum radiator lockers in rear full roll cage fuel cell remote battery with power disconnect”
I am told the CJ-2A has a flathead V-8 and the MB has a Studabaker 6.
https://www.facebook.com/marketplace/item/230688805405383
“2 Jeep’s mid 40’s”
Has a variety of mods.
https://www.facebook.com/marketplace/item/3306742246092497
I have way to much stuff on my property . Most of it has been sold and not picked up yet . Thank you to the guy who picked up the boat yesterday after 6 months .. I really need this stuff gone to the others . No i am not selling what has already been sold . I just at least need to get some of these parts gone . This post is for the 42-47 willys parts . Come get it all $7000.
Complete running 47 With title in hand . Chevy v-8 283 headers Turbo 350 T-18 t-case Dana 44 front with ARB 4:30 and disk brakes . High steer . Dana 44 rear, full float ,chromo , locker, disk brakes . 23 gallon aluminum fuel cell . R.O.P. Cage Suspention seats 4-point racing harness New 35″ mud terrain’s Locking Fluid box . Yard sale storage deck in rear . CB / PA Comes with short solid steer axles for building trailers . 3 tail gates two of those willys. Willys hood 2 sets of fenders Willys windshield frame and glass
There might be value here.
https://www.facebook.com/marketplace/item/230688805405383
“1946 Jeep Jeep · Other_body_style · Driven 1,000 miles 2 Jeep’s mid 40’s”
UPDATE: **SOLD** Was $9995.
It’s got a single lever PTO as well.
“A classic Willys Jeep CJ2A. (it is not a Gladiator but there wasn’t a Willys option). Drives very well for a 75 year old. Good power, steers and brakes excellent. Sounds like the Jeeps on MASH. Very original. Have the parts list from the rebuild 20 years ago. Tires are in good condition but they are original from the rebuild in 2001. A great parade vehicle for the summer holidays. On the downside, there is a battery charging issue. I keep it on a battery maintainer and sometimes if you are going downhill and turning to the left, it will pop out of 2nd gear. If you are holding the shifter, it stays in gear without issue. Clear title. Lots of fun and a real head turner.”
This might have a dual PTO.
https://www.facebook.com/marketplace/item/824966314767009
“2 door 1948 willys Jeep includes front and back winch all original good clean title”
UPDATE: Still Available.
(02/05/2021) It’s supposed to have the original engine, but it looks like it has a later model oil filter bracket.
https://www.facebook.com/marketplace/item/1182315148832059
“1946 Jeep Willys Runs! Clean Title. Non-Oped. Original Flat Head 4 motor. Must see!”
UPDATE: Price dropped to $4000.
It’s a project or parts.
https://www.facebook.com/marketplace/item/1927841974050574
“Flexible on price open to trades. Small block Chevy mounted to t90 trans (no clutch in currently), Dana 20 tcase, new frame horns (18”), plated frame from bumper to firewall w/ 1/4” steel. Unfinished project don’t have the time right now. Registration was just paid. I have a good bit of parts for it.”
While the price does include tools (such as a parts washer), the price still seems high for a project. Maybe there are many more tools than listed.
https://www.facebook.com/marketplace/item/1653049221528167
“1947 Jeep Willys Restore/Rebuild Project Parts, tools, lots of extras pieces, guides, etc. Frame was completely rebuilt, motor was next on list to rebuild. Comes with parts washer, tools, jacks, engine stand, and whatever else in the garage that would help you. Jeep was never titled according to precious owner who bought it from the Army. This would make a great dad/son winter rebuild tinkering project. My loss is your gain and I know my husband would love to see someone else enjoy bringing it back to life.”
The engine has been removed.
https://www.facebook.com/marketplace/item/742272726434104
“1946 willy’s CJ2A needs to be restored and rebuilt also comes with two engines 2.2 l I would like to get as much as I can out of it. There getting harder to find.”
UPDATE: Still Available.
(11/30/2020) This custom road jeep will need some work. The body may be atop a non jeep 2WD chassis.
https://www.facebook.com/marketplace/item/3572353829493079
“1946 Jeep willys with 4.3 vortec engine and transmission. Was running and driving but now won’t move. Maybe transmission maybe something else. Was driving and went to go somewhere won’t move. Wish I had the time to work on but not looking like anytime soon. Obviously needs pretty much full restoration but definitely a good start. Don’t waste either of our time with offers by text, they are worthless and zero people who make offers by phone ever show”
It’s a project with a title.
https://www.facebook.com/marketplace/item/272077711097563
“Would like to sell for 1400 or trade. Clean title in hand. Its got floorboard rust and its a project. I started raptor lining it od green and have the rest of the liner to finish it to go with it. Original 4 cylinder spins over freely. Comes with factory axles and a set of jeep cherokee axles. Have way too many projects. Wheels and tires in pictures don’t go with it”
UPDATE **SOLD**.
Seller is accepting offers, so unclear how firm he is on the listed price (and I’m unclear just how much value is here).
“No titles two frames and a ton of other parts sat in a field forever engine was locked up needs complete rebuild the transmission transfer case is a t-84 wwii steering wheel Rims I have all three styles two are non slotted I’ve got the axles brakes another block extra parts.. never had the tub for it one of the frames is rusted the other is good. You’ll have to come and take a look at whats here I haven’t looked at this stuff in a year or so..then make an offer.”
UPDATE: Still Available.
(11/24/2020) The half cab appears custom. Nothing indicates it is a 1945 model.
https://www.facebook.com/marketplace/item/2860221170857907
“1945 Willys jeep runs drives stops new floor braces,floor pans,fuel pump,exhaust,gauges”not all hook up yet”,choke and throttle cable all new lights and led back up lights custom built half cab with large sliding back window original Willys doors with roll down windows seats redone 33 boggers on back swampers on front not perfect or flawless but great trail buggy sure I’m forgetting some stuff”
UPDATE: Price dropped to $3500.
(03/03/2021) This is a project.
https://www.facebook.com/marketplace/item/1128972637577767
“I’m burned out on this project and want to sell. This CJ2A came out of West Tennessee and has had the frame and body repainted and the rust patched. There is some surface rust bleeding through the paint as you can see in the photos on the body.
Engine is a L-134, rebuilt by the military at some point Transmission is a Ford T18 Transfer case is the original Dana 18 Front axle Dana 25 Rear axle Dana 41
Disc brakes are on all four wheels. 7.00×16 NDT tires with excellent tread
All the parts are here to complete it.
Price is negotiable.”
UPDATE: Still Available.
(11/16/2020) Given the price, there might be value here.
https://www.facebook.com/marketplace/item/346038503320041
“Toy or parts has a 350 motor an 400 trans has military running gear”
UPDATE: Still Available.
(12/12/2020) I’m not sure how much value is here.
https://www.facebook.com/marketplace/item/2528223204141583
“1946 Willys Jeep. Make nice reservations project or hunting vehicle. Engine is out of cj3 I do have the flat head 4 for it. Was going to rebuild but to many projects and I am not getting any younger. I do have a title for it witch are hard to find”