Monthly Archives: December 2024

To Top

1947 Delivery Fresno, CA $5,000 (Drag Willys)

• CATEGORIES: Willys Wagons • TAGS: , , , This site contains affiliate links for which I may be compensated.

“Andy’s Picks”

https://www.facebook.com/marketplace/item/260501820356644/?rdid=WjshYy7ki3MMl0pR&share_url=https%3A%2F%2Fwww.facebook.com%2Fshare%2F18s8AD3f1E%2F

So here is one Andy tossed my way, I don’t see this as a viable Drag Racing anything here, but you can absolutely build it to what you need this to be. You will need some “Vision” here.

The Delivery with Barn Doors is the cool part to me, along with the patina, it looks solid.

IMO I’m taking this off the chassis they tossed together that sounds like it all needs to be rebuilt anyway and you have a really neat Willys to work with there are some areas that look done like the firewall and transmission tunnel. Floor looks really nice,

No title so that’s a negative, not being sold as a street legal anything here so its going to require some work.

The collection of parts is impressive, for how much modification has been done, I don’t personally see the pay back here at the price point in parts alone so your going to need a plan here as far as use and project base goes.

If it was on my way home, I would stop in and take a look and see what the deal is here if you looking for a project base.

From the Ad:

“I’m going to go ahead and get a VIN applied to this, so it may take a couple of months before this will be available for pickup.

Not sure of the year, but It’s an early Willys Panel. There is no VIN plate on this, and I have no idea what the VIN is.

We were going to make this into a twin turbo drag car. Comes will brand new glass and rubbers, door handle repair kit and LED headlights.

We had the frame, underside and interior of the body blasted. The frame has been painted, but some of the body was left raw and there is some mild surface rust to clean up.

The firewall has a brake master cylinder installed and smooth panels welded in. The frame, firewall and floor have been modified to fit a bigger transmission.

The original 2wd front suspension was cut out and a narrowed crown vic front suspension is partially installed.

We do have the hood, but I forgot to take a photo. The rear leaf hangars were cut out and aftermarket ones tacked in place.

The rear axle and springs are only mocked up and the axle will need a rebuild (Explorer 8.8).

You can buy it with, or without the crown vic front suspension.

I won’t sell parts, you’ll have to buy the body if you want the parts. No trades, sorry. Bill of sale only, remember, there is no VIN, so it might be difficult to title if you’re planning on street registering it.”

47WagonProject-1 47WagonProject-2 47WagonProject-3 47WagonProject-4 47WagonProject-5 47WagonProject-6 47WagonProject-7 47WagonProject-8

 

 
To Top

1955 Wagon Costa Mesa, CA $1,089

• CATEGORIES: Willys Wagons • TAGS: , , This site contains affiliate links for which I may be compensated.

Update: Price Reduced $1100 now $1,089

“Andy’s Picks”

https://www.facebook.com/marketplace/item/495057516538146/?rdid=JH8oIymQvkyu4zp6&share_url=https%3A%2F%2Fwww.facebook.com%2Fshare%2F1Ds7uUAjBP%2F

Posted as a 1955 226, no engine installed, but you can make out a very little part of the gauges and the rear gate is split so could be. Has the longer input shaft on T90 for a 6 cylinder, and has the extra shifter so should have a Overdrive with this one, which is a bonus.

Looking inside there are more surprises besides the vintage buckets, the heater box and controls are the later post mid 1962 commonly supplied on the 230_OHC Wagons and trucks, then the later CJ’s had a version of these as well. So they could be of interest to some collectors.

You start adding it up and you have a good little chunk of parts here for sure. I’m not sure you have a break even parting this out when you start adding it all up at the current asking price, but parts are parts.

This is a total project as far as a restoration goes, you are not getting that “out West” rust free start here with this one.

From the Ad:

“It’s a 1955 6-266 Willy’s Jeep Wagon This will be a major restoration project for whoever buys it. It needs alot of fabrication as it has a ton of rust / rot. Serious inquiries only. Title: Vintage [hidden information] Station Wagon Project Car Willy’s Jeep Make an offer. Price is very negotiable! I don’t want to trade. I have too many cars! Condition: Non-running, requires tow; has rust; engine disassembled years ago with various parts sorted in boxes within the car(in pictures) Includes: Original title, owner’s and service manuals, old part receipts. Note: Vehicle hasn’t run in 20+ years. Has been sitting in the SoCal sun the entire time. This is going to be a huge project for whoever buys it. Lots of rust + fabrication needed, if you don’t know how to restore a car then this is not for you!

55WagonProject-1 55WagonProject-2 55WagonProject-3 55WagonProject-4 55WagonProject-5 55WagonProject-6

 
To Top

Stordor For Sale Atwater, CA and Goldfield, NV

• CATEGORIES: Willys Trucks • TAGS: , This site contains affiliate links for which I may be compensated.

Folks not familiar with the Stordor these were box trucks that were on Willys chassis. There was a fairly large market of box trucks like the Grumman, Metro of course the big 3 as well, the box was installed over a chassis.

Here is a back post from Dave on the Stordor……..

The quickest way to tell them apart is by the grill in the front.

The Willys Stordor has a unique single set of vertical grill bars on top of the dual horizontal grill bar areas below.

These pop up from time to time, price can vary based on condition.

Here are a few of “Andy’s Picks”

1940’s Willys Truck/Van Atwater, CA $7,000 

https://www.facebook.com/marketplace/item/466071383031231/?rdid=z5PUF6TuYE9kwyvy&share_url=https%3A%2F%2Fwww.facebook.com%2Fshare%2F15sBcZJ2hn%2F#

stordor_1

stordor_2

stordor_3

stordor_4

stordor_5

Here is another from Andy, we are posting the Ad years here, but really I’m a little skeptical that these would be mid ’40s, my guess would be late ’40s, like 48, 49, 50….. but someone may know better then my guess here. My baisis is just I wonder if Willys had the vision to sell these so early on in the chassis only version right out of the gate. The answer could be yes it was all part of the overall design to support the market and they were happy to sell units.

This could very well be a Chevy not sure buyer beware, if you get there and need some Willys help with ID on the driveline post up a comment. Could also make a Cousin Eddie RV out of this one!

1945 Chevy Willys overland store door Goldfield, NV $3500 

https://www.facebook.com/marketplace/item/562408722985130/?rdid=qkSImey3PFBb8LCl&share_url=https%3A%2F%2Fwww.facebook.com%2Fshare%2F14qQJW2f1bf%2F

“This is a Willys store door chevy. OK don’t kill me. Put a 318 in it. Runs drives I got it with no motor or trans. Guy was making it a camper but inside is not done. Some superficial rust I found but it’s nothing to stress. Aluminum sidding was on it but it’s still a solid steal box. Bell grill an all it’s a beast but a very rare willys.. asking what I paid 3500 OBO”

stordor_6 stordor_7

 
To Top

eWillys Content and Contributors

• CATEGORIES: News • TAGS: This site contains affiliate links for which I may be compensated.

Just wanted to share some stuff on the backend, this will be a team effort and you will see some stuff from a few great Willys folks along the way.

Stuff like “Andy’s Picks”, and a few other tricks up our sleeves. Some other Authors are in the works, if they toss up a formal introduction or not, up to them really, but we will have some others helping post stuff. So be on the look out!

I think there is value in most anything but I don’t think we need to post just to post, to fill a certain quota. It may not be all ad’s all the time. The Authors may have some neat information to share or points of view on all things Willys.

Will try to keep the ad links up high in the posts for folks “in the know”, but if I’m learning it for the first time odds are I’m sharing that along the way because there probably is someone else who.csn use that link or knowledge, and maybe I get some comments and we all learn something new.

Vendors

One plan is to reach out to some of the quailty vendors who keep our Willys world working. Mostly to see what’s new or upcoming, maybe you have some special stock of something that might be of interest to others.

Vendor spotlight might be fun to hear a little bit about the history or start up. Probably will have a quick format for that process. No skin in the game here for us, just trying to get some good info out to folks for where parts can be sourced if you would like to talk and share a little at some point keep us in mind. More to come on this idea.

Events

Same for events, it’s great to share a link and that’s super easy, but what makes your event unique, any tips on travel or where to stay for guests from a far. I really like to know about any super tricky roads or access to the event, is there trailer parking for example.

We are able to do something a little more then just the link if your game to share we would love to help spread the word. It’s so much work to put these events on so happy to at a minimum share the link, but can also add some stuff if helpful.

Comments

Posts in general feel free to add a comment or more details if we get it wrong or there is a varying opinion. But please keep it respectful and positive.

Not required at all to comment or like a post. We don’t need to track any of that, but if you do like it or do not, always welcome to let us know so we can get some feedback. This is a non-political site, family oriented,  so posts and comments will always be geared towards that.

If the year is posted for a rig and it’s wrong I typically post the year as per the ad, but will add a comment if it’s a Salad or just not what it is. Sometimes that’s also on purpose to keep all of us on our toes.

Contact Us

Work in progress, while we have a temporary email set up for now, I’m waiting to see if we can fix the site mail in the next few weeks before we post it up, so leave a comment for now and we will get it, if it needs to be off line let us know and we can reach out, you won’t need to share your email in the comment, it comes across the backend.

Thank You!

I really appreciate everyone who has reached out and overall supported me or the site over the years. It’s been a good start and as we get things sorted should be an enjoyable spot to check out from time to time.

Thanks, Tim

 

 
To Top

1953 Willys CJ3B Woodland Park, CO $1,800 (Deleted)

• CATEGORIES: CJ-3B • TAGS: , , , , , This site contains affiliate links for which I may be compensated.

“Andy’s Picks”

CJ3B, project for sure. Again short cut for those in the know.

This posting has been deleted by its author.

The value here is probably in the sum of the parts.

SBC with center dump manifolds sure makes it easier for the exhaust.

Can really see why the louvers are needed in the hood, luckily this is probably underpowered for a V8 swap looks fairly basic.

Has the start of power brakes which something better then stock 9″ will be needed for sure.

Ramsey Winch

Husky Overdrive

Has some neat accessories.

Here is a breakout for folks who may not be 100% familiar with all these parts or what’s going on here.

On a standard no accessories Transfer Case there is a small tin cover on the drivers side, pop that off and this allows for some neat options, and in this case multiple options.

One thing needed is to count the teeth on the gear under that cover, early ones are 26 tooth (26T) later are 29 tooth (29T). So not all parts are equal, buyer beware.

The emergency brake is also off the back of the TC where the rear drive shaft comes out. Fairly standard stuff there.

00Q0Q_gVQtbqF1y31_0CI0t2_1200x900

The SBC will also have a special bell housing adapter and the front bearing retainer on the transmission will be special for a SBC conversion, so you will want to grab all those stuff when your picking SBC adapters, would require a long input shaft as well vs the short 4cyl one. (None of this is shown here)

So as much of a project this one is, there is alot going on to pay attention to, and it could all be in very poor shape, but it looks fairly complete.

00O0O_fabLX1OZzII_0CI0t2_1200x900 00000_fjy5GcSHxCS_0CI0t2_1200x900 00P0P_4o5sC5rA8me_0t20CI_1200x900 00x0x_fv2dSnZ7fFp_0CI0t2_1200x900 00v0v_4sWtqFscBFB_0lM0t2_1200x900

 

 
To Top

1950 CJ2A Billings, MT $3,000 (Deleted)

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

Update: Listing Removed.

Yes I fully get the CJ2A was not made in 1950, but as we know it’s possible the title work and sale was done in 1950. My motto is if the title says it’s a 1950, well who is to argue. But really with something this old anything could have been added along the way, Jeep Salads are very common. Also makes no mention of a title in the ad, so may need to do some homework.

I’m kinda green to CJ’s and the differences so come learn with me if you would like to follow along, or click the link for

There is nothing here. No web page for this address. 404 Error.

My easy button to learn more was the resource in

at CJ3A.info they have a great guide so I followed along with that.

https://cj3a.info/cj3a/cj2acj3a.html

First the windshield 2 piece is a CJ2A, the 3A is 1 piece. But those are interchangeable.

Screenshot_20241229_214502_Chrome

Ignition switch on the right side.

Screenshot_20241229_214429_Chrome

The 2A drivers seat bracket has that slight downward slope vs the more 90 deg the 3A has.

Screenshot_20241229_214345_Chrome

Then this has the bow storage on the outside of the drivers rear quarter. CJ2A had this the 3As did not.

Screenshot_20241229_214406_Chrome

Some other features I like on this one…….

This rig has some great Patina to it, it could be a really fun project.

Has a top bow.

Wheels look period correct. Not going to have the period correct air in the LF, but can’t have everything.

Don’t miss that rear PTO!

This was one of “Andy’s Picks”, thanks for the link! Doubt he thought I could drag this out so much, but as I learn might as well pass it on to others who may want to follow along.

01111_9ylwbLOvtcL_0CI0t2_1200x900 00t0t_2fGEPssjHNc_0CI0t2_1200x900 01212_e5v1EF7Xf9u_0t20CI_1200x900

00H0H_43x5oVRtldW_0CI0t2_1200x900

 
To Top

1949 Jeepster Diana, TX $10,500 (Deleted)

• CATEGORIES: Jeepster • TAGS: , This site contains affiliate links for which I may be compensated.

Update: Listing removed.

Gail has this Jeepster posted for sale, looks to be between Tyler, TX and Shreveport, LA. Has some items that need to be addressed. But also has a lot going for it, the bright work looks complete, and the bulk of it is there. I don’t have a Jeepster in the fleet…… yet!

I’m not sure those dual autolite horns are original, anyone know? They are period correct and do sound cool, I do like the Wagon and Truck smaller single early horns, they have a classic sound.

There is nothing here. No web page for this addres. 404 Error.

“Punkin” is ready for a new garage. She runs well with her 134L 4 cylinder engine and 3 speed manual transmission.

She isn’t perfect, but not bad for a 75 yr old. A few things have been replaced on her lately. All new wiring harness, wheel bearings, brakes, master cylinder, fuel pump, water pump, fan belt, starter, battery, kit in carburetor, bumpers and steps were re-chromed a few years ago and other necessary items replaced.”

00T0T_lcpFYushEqb_0CI0pZ_1200x900 01010_a4ZxZpFMZtB_0CI0pZ_600x450 00o0o_hq3GyYz7JEA_0CI0pZ_1200x900 00707_kSJUlGxvxoH_0CI0pZ_1200x900

 
To Top

1949 CJ-3A Bozeman, MT $13,500 (Deleted)

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

Looks pretty solid.

This posting has been deleted by its author.

“This is a 1949 Willys CJ-3A with the 4-cylinder gas enigne and a 3-speed manual transmission. It shows 13,103 miles though true miles are not known. It is bright green with black leather-like seat covers. This Willys was restored in the 1980’s and has been stored in a heated shop ever since.”

“This Willys has been in our family for over 40 years. We recently replaced the carbuerator, spark plugs, wires, and battery. Runs and drives like it should with some oil leaks. No top, doors,etc. $13500.”

00g0g_gbARgxPOxQS_0ak07K_1200x900 00202_4auq0qKx4aB_0ak07K_1200x900 00i0i_53mdDWpbhyt_0ak07K_1200x900 00606_7Chiu25XVDj_0ak07K_1200x900 00P0P_fCxQ5ldlKt3_0ak07K_1200x900

 

 
To Top

Happy Holidays!

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Merry Christmas and Happy Hanukkah, not often they start on the same day but we celebrate Christmas in our family and have many family and friends who celebrate Hanukkah.  I think anytime you can take a break and disconnect from the day to day it’s a great time of year to spend with your family and friends.

I looked through my phone gallery looking for something to post, I can always toss up a photo of Willa Dean or the Red Wagon each have been our Christmas cards over the past two seasons. But probably my favorite Willys event of 2024 was the Great Willys Picnic. (Way too many pics to choose from!)

So here are some shots I took at the Picinic it was a wonderful turnout of over 90 Willys and a great drive out in Willa Dean, got to connect with a few folks from over at OWF and spending that time with folks.

The overall venue is awesome, lots of things to see outside of the Picnic there is the WK&S Train Ride, Wanamaker Kempton and Southern Railroad. It’s very nice operation and took some time to check out the station, gift shop, and food. Talking with some of the volunteers on how they got involved and it’s quite the family and friends operation.

My ride over is all back roads from NW NJ I crossed at Belvidere and shot out West you ride the hills of NE PA. Having never taken some of these roads before it was an exciting ride for me, Willa Dean has her original column shift and  L134, it really is a time capsule, in total looks like Google recorded 121 total miles for the trip.

If your looking for a trip to the NE this is a great June event. Lots of work goes into this one.

The Great Willys Picnic Facebook Page

CJ3A Picnic Page

Hope everyone has a great holiday, Tim

20240609_083703

20240609_165514

20240609_165612

20240609_165655

20240609_165727

20240609_16575620240609_165839

20240609_170807

 
To Top

Introduction

• CATEGORIES: News • TAGS: , , This site contains affiliate links for which I may be compensated.

Just wanted to toss up an introduction post to folks so that things don’t linger too much. My name is Tim Driscoll (Timd32 on OWF) and between myself and a small team of folks helping on the back end sorting out the hosting and domain work will be working to maintain eWillys.

First and foremost I would like to thank Dave for trusting in me to do the right thing and take eWillys into it’s next adventure. I’ve been in this position before with a very prominent Willys project, it’s not always easy to step into such a great personal project like eWillys and maintain the high level of work performed prior. I often wondered if eWillys was Dave and with no Dave is there an eWillys? But after discussing the project and my history and views on Willys I think we are very well aligned with what eWillys is and what it should never be. No one can replace Dave and build another eWillys, but with so much knowledge and history a lot of us thought it important to take a step to move eWillys forward and continue it’s journey.

Thanks Dave for all the past years of eWillys and the support to move forward with this project!

I’ve been involved with Willys since 1995 when I bought my first Truck.  The truck was/is an early 2WD Willys Salad was priced at $500, did not run, had a really rotted wood bed, I-beam front end and an 8 lug dana rear differential. We pulled it home with a chain which is always a good time, with limited brakes it was a completely unknown vehicle and unknown mfg to my 18 year old self, and so began My Willys Adventures. Over the last 29 years I’ve enjoyed learning and working on Willys of all sorts. For me it’s more about the people then the parts. The stories and hearing others adventures, hearing the history of their families and the joy Willys have brought them.

Since that time I’ve had several Willys and the current fleet includes a few Wagons and Trucks, a large collection of 230 Tornado Engines (mostly cores, “Save the Tornados”). Along with at least one each of the other more common engines L134, F134, 226, everything except anything related to the 161’s.

The nice Willys in my fleet were bought not built I’m the current caretaker of Willa Dean who is a 1948 4T Truck that every single part was lovingly restored over a 3 year period by Vintage Don. Then this year I picked up a super nice 1963 Wagon with the 230 Tornado that was rebuilt and painted in 1994, it’s was also a well loved Willys throughout it’s 30+ years with the last owner, the back story and ownership history are really impressive and the Wagon is a joy to drive.

Our initial goals with eWillys is to maintain the site as it is, I don’t have any major changes to the site to start off. The hosting needs to be sorted out and then any updates required will be performed, we may not have daily posts till we get it all sorted out. Overall I’m a big supporter of (semi) accurate history, I say semi because basically if there is one thing I’ve learned about Willys is you will be surprised at the twists and turns the brand took and what appears to a fact can easily be disproven by one of the many Willys experts in the field.

As I gain the knowledge needed to run the site and navigate the path which it will naturally take, others may join in and assist from time to time. I’ve had alot of help and there are many mentors that have helped me with my Willys over the years. So it’s just natural that this will likely be a team effort. There will be mistakes along the way, things that should have or could have went this way or that way, so bear with us at times. If it’s wrong we will correct it, if it’s broke we will fix it. Every Willys leaks a little something (or its empty) rarely will you find a trailer queen, Willys are meant to be driven, maintained, fixed, and others constantly worked on at times, which I fully expect a website like eWillys will need the same from time to time. But like a well sorted Willys, eWillys should be an enjoyable experience, with just a touch of frustration from time to time!

Thanks for hanging in there, with the holidays it may result in longer then normal reply times and as the work continues there may be some downtime, so don’t give up on us quite yet.

Merry Christmas, Happy Holidays, and Happy New Year to all the folks who have supported eWillys over the years. Especially to Dave and his family who have brought so much to the Willys community over the years.

Thanks, Tim

1948 Willa Dean 4T Truck and 1963 230 OHC Wagon

Willys32