No pics. This appears to be a very early CJ-6 (#35).
“First production year CJ6, one of 2224 from 56. Bought this as a trail rig project, but don’t have the heart to tear it apart. Stock F head/T-90/model 18(twin stick). Motor runs but needs flooding carb repaired/replaced ( have replacement carb should be on this week). This was a eastern Oregon/Washington rig, and that is reflected in the lack of rust. Bench seat needs recovered, but is in it. Front floor pans are clean (both follr pan supports have about 3-5″ of rust through, and rear pan is clean, but saggy in places (this was a farm truck), tool box seems to be clean. Rear gate is dented, and gate frame is cracked, both front fenders are dented. PO had welded reinforcement stock on front horns. Has a Ramsey front PTO, and shaft, but no winch. Also has a Koenig half cab steel hard top, with doors. Top has had about 5 inches of weld repair performed ( to driver side windshield mount, and both driver and pass side rain channels) and has some surface rust, but no cancer. Doors are sliding window models, and are both missing bottom hinges, and are in need of latch repair. Neat old rig, vin # ends in 10035, I believe this to mean it was #35 off the line, when production of the 6 started in late 55′. Will not have a title in my hand for a week or two, but thought I would put some feelers out, and see if there was any interest from someone who would restore it. Pics avail upon request.”